Dishwasher Repair Forum
Poor cleaning, leaks, blocked drainage and the most common error codes for integrated and freestanding machines.
Recent Questions
Hotpoint dishwasher not heating the water
Hoping someone can help with my Hotpoint dishwasher — the water stays cold so nothing gets cleaned properly. Is this something I can fix myself or do I…
Beko dishwasher showing an E code and won't drain (E25)
I've got a Beko dishwasher (DEN48520XAD) that's about 6 months old and it throws an E error and leaves the water sitting in the bottom. It's showing E24.…
Electrolux dishwasher not drying the dishes?
Bought a Electrolux dishwasher two years ago and everything comes out soaking wet at the end instead of dry. Any idea what's causing this?
AEG dishwasher leaking water onto the floor
My AEG dishwasher, 3 years old — it leaks water out onto the kitchen floor part way through the cycle. Would really appreciate any advice before I fork…
Indesit dishwasher leaving white residue on glasses
Indesit DFG15B1 — glasses and plastics come out with a chalky white film. We're in a hard water area and use Finish tablets plus rinse aid. Already cleaned the spray arms and...
Neff dishwasher salt light staying on
Hoping someone can help with my Neff dishwasher — the salt/refill light won't go off even though I've topped up the salt. Would really appreciate any…
Bosch dishwasher not draining, water left in the bottom?
Bought a Bosch dishwasher 6 months ago and there's a pool of dirty water sat in the bottom at the end of the cycle that won't drain away. Really hoping…
Help - Zanussi dishwasher tablet not dissolving
My Zanussi dishwasher (ZDF26020WA), around a year old — the detergent tablet is left sitting in the dispenser undissolved at the end. Is this a common…
Beko dishwasher salt light staying on?
I've got a Beko dishwasher that's 3 years old and the salt/refill light won't go off even though I've topped up the salt. What should I check first?
Miele dishwasher F11 error and standing water
Miele G5210 SC throws an F11 (drainage) fault near the end of the cycle with water pooling at the base. Cleaned the filter and checked the drain hose for kinks behind the unit....
Bosch dishwasher spray arm not spinning, any ideas?
I've got a Bosch dishwasher (Serie 4 SMS4HKW00G) that's a few months old and the spray arms don't seem to be turning so the top rack barely gets washed.…
Neff dishwasher not filling with water
I've got a Neff dishwasher (S155HCX27G) that's a few months old and it won't take any water in and just hums at the start of the cycle. Is it worth…
Help - Samsung dishwasher salt light staying on
I've got a Samsung dishwasher that's around a year old and the salt/refill light won't go off even though I've topped up the salt. Would really appreciate…
Smeg dishwasher very noisy during the wash, any ideas?
Hoping someone can help with my Smeg dishwasher (DFA13E3) — it's making a loud grinding/droning noise throughout the cycle. Is this a common fault on…
Miele dishwasher door won't latch shut?
My Miele dishwasher, around a year old — the door won't click shut so the cycle won't begin. Any idea what's causing this?
Samsung dishwasher not drying the dishes, any ideas?
Hoping someone can help with my Samsung dishwasher — everything comes out soaking wet at the end instead of dry. What should I check first?
Beko dishwasher not heating the water
Hoping someone can help with my Beko dishwasher (BDFN26430X) — the water stays cold so nothing gets cleaned properly. Has anyone had the same and managed…
Help - Zanussi dishwasher filling and draining constantly
Bought a Zanussi dishwasher a year ago and it keeps taking water in and pumping it straight back out without washing (anti-flood maybe). Really hoping…
Candy dishwasher won't start, any ideas?
Hoping someone can help with my Candy dishwasher — it's completely dead, no lights and nothing happens when I press start. Grateful for any pointers,…
Hisense dishwasher not heating the water?
I've got a Hisense dishwasher (HS60240WUK) that's around a year old and the water stays cold so nothing gets cleaned properly. Is this something I can fix…