Home

Tumble Dryer Repair Forum

Condenser, vented and heat pump dryers that won't heat, keep stopping or leave the load damp.

Tumble dryers are simple machines but they still fail, usually because of heat or airflow. The faults we see most are a tumble dryer not heating, clothes still damp after a full cycle, the dryer not turning on at all, cycles taking far too long, or a rumbling or squealing noise from a worn drum bearing or belt.

Whatever type you own - vented, condenser or heat pump, from Hotpoint, Beko, Bosch, Indesit, Candy and more - our community can help you find the fault. Browse the questions below or ask your own; answers come from fellow owners, real engineers, and our WhitegoodsHelp AI Assistant.

Got a tumble dryer fault?

Describe your problem and get free help from UK engineers and experienced DIYers - most questions get a reply within hours.

Recent Questions

Solved
Tumble Dryers
Bosch
ICAsked by Iain C

BOSCH WVG30461GB WASHER/DRYER NOT DRYING

My Bosch WVG30461GB has twice in the last month stopped drying clothes, both times I've removed the top cover from the machine and pressed the small switch between the two green...

Latest reply 5 days ago by Washdoctor
AI answer
Tumble Dryers
Bosch
DIAsked by DiogenesVS

Replacing a dryer fan in a Bosch Washer/Dryer combo machine

We have a 7 year old Bosch Washer/Dryer machine. We typically use the dryer cycle only on towels. A complete wash/dry cycle can take over 4 hours so we set the timer at night an...

Latest reply 21 days ago by Paul C.
Tumble Dryers
Indesit
ANAsked by andy

Indesit IDVL75BR tumble dryer - slowly flashing run/pause button on power on. three beeps on power on/off but nothing else

Slowly flashing run/pause button on power on. three beeps on power on/off but nothing else. Have replaced controller board and heater block, along with front thermistor - what e...

Latest reply 28 days ago by WhitegoodsHelp AI
Tumble Dryers
Siemens
SLAsked by sl754

Siemens iQ500 dryer, door hook broken; how do I separate the door?

Siemens iQ500 dryer, E-Nr WT46G400GC/04. The metal door hook has broken. I’ve taken the door off, on its hinge, but there are no visible screws securing the hook. The silver out...

Latest reply about 2 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
Bosch
SKAsked by Skippydoo

Bosch wvh28360gb washer dryer clothes not fully drying

My seven year old washer dryer seems faulty. Normally clothes are very dry after it’s very long wash and dry cycle. It’s a condensing washer dryer. I noticed clothes were still...

Latest reply 5 months ago by WhitegoodsHelp AI

Can't find your fault?

Ask about your tumble dryer and get a tailored answer from our community.

AI answer
Tumble Dryers
Bosch
DIAsked by DiogenesVS

Bosch Washer/Dryer combo that stopped in the night on a wash/dry cycle

Hi. It's me again. I have a 7 year old Bosch Washer/Dryer combo that stopped in the night on a wash/dry cycle. The circuit breaker to the kitchen had popped. And it popped a cou...

Latest reply 5 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
Miele
JAAsked by jayj

Miele washer/dryer WT2780 display steaming up after engineer visit and more

(As Miele washer/dryers are rumoured to all use the same basic drying system, probably applies to other models too...) Had a Miele engineer come under warranty to replace pretty...

Latest reply 5 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
Bosch
COAsked by colinmc22

Bosch avantixx washer dryer freezing

Hi lads, I've a bosch advantixx washer dryer that is freezing only when drying. It happens after the drain pump runs during the cycle. I thought it might be the pump which I've...

Latest reply 5 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
ROAsked by Roger341

Washer dryer motor issue

Hi. I have a hoover washer dryer VHW854. it’s been going well considering it’s age but the dryer packed In recently ive replaced the heating element and the heater motor which s...

Latest reply 5 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
Miele
SPAsked by Spindizzy

Miele Washer Dryer WT 2670 Dryer burning smell

Our WT 2670 is out of warranty and there is a burning smell when you run a drying cycle, the clothes are hot but wet. When this happened before it was a blocked duct over the to...

Latest reply 5 months ago by WhitegoodsHelp AI

Can't find your fault?

Ask about your tumble dryer and get a tailored answer from our community.

AI answer
Tumble Dryers
WHAsked by Whitegoodshelp

Container in door of dryer cracked

Lots of people are experiencing cracks and leaks in the Hoover and Candy tumble dryer door water container that collects condensed water from the laundry when drying.

Latest reply 5 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
Bosch
TOAsked by TomClaw11

Bosch Heat Pump Dryer not drying clothes properly

Hi, I have a Bosch heat pump ECOLOGIXX 7 dryer. I have to run the cycle at least twice for the clothes to be dried and sometimes a 3rd time if they are still slightly damp. The...

Latest reply 5 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
Neff
LOAsked by Loudancoe

Neff Washer Dryer Mystery?!

A few days ago my Neff washer/dryer stopped mid program and displayed the following on the screen. The water wouldnt drain so i drained it manually but now any program i try to...

Latest reply 5 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
Bosch
MOAsked by morrisofbushey

Bosch washer dryer stuck on 0.01

For some reason my machine has stopped working, it is stuck on 0.01 and I can't change the cycle or do anything. I last used it on Tuesday and remember it had accidentally gone...

Latest reply 5 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
NIAsked by Nikki

Nef washer/ dryer

It keeps flashing up it need fluff clean but drum won't spin

Latest reply 5 months ago by WhitegoodsHelp AI

Can't find your fault?

Ask about your tumble dryer and get a tailored answer from our community.

AI answer
Tumble Dryers
Hotpoint
ROAsked by robstar*

Hotpoint Wdpg8640 Washer Dryer Pump Failed Twice And Mystery 3 Beep Fault.

Hi All, We have a Hotpoint WDPG8640X washer dryer UK purchased December 2013 which has failed twice in the same way. After 10 months the machine intermittently failed to pump ou...

Latest reply 5 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
Bosch
WPAsked by Wps

Bosch Washer Dryer Wvt12840Gb / 04

Hi Looking for somehelp please? ? Ive changed the brushes on the motor of the machine above, as it had been working normally till they failed. The motor now works fine, but I go...

Latest reply 5 months ago by WhitegoodsHelp AI
AI answer
Tumble Dryers
Samsung
HOAsked by Holm

Samsung combi dryer/washer motor ( EC2) code.

Hello! I have a combi washer WD90N643OAW from Samsung thats giving me a headache! Started with the first time the issue came, i bought a new PCB board and boom it started spinni...

Latest reply 5 months ago by WhitegoodsHelp AI
Solved
Tumble Dryers
Baumatic
GOAsked by Gooner2459

Baumatic BDI1485D4E integrated washer dryer not drying.

Baumatic BDI1485D4E integrated washer dryer not drying. I removed the top to get access to the heating bit of the machine. Ran the heating cycle but that bit remained cool (it s...

Latest reply 10 months ago by Whitegoodshelp
Solved
Tumble Dryers
LEAsked by Leeboy

Bekon wdir7543101 washer dryer door won't open

Hi, my washing machine has finished cycle. The lock is flashing but nothing will open the door. Switched it off, depowered for hours. There is no manual release any suggestions?...

Latest reply about 1 year ago by Whitegoodshelp

Common tumble dryer problems

Why is my tumble dryer not heating?

No heat usually means a blown thermal cut-out (often caused by trapped fluff), a failed heating element, or a faulty thermostat. Always clean the filter and check the condenser or vent first, because blocked airflow is what trips the cut-outs. Tell us the model and we can help.

Why are my clothes still damp after drying?

Poor drying is almost always an airflow problem - a clogged filter, a full water tank, a blocked condenser, or a kinked vent hose. Heat pump dryers also dry more slowly by design. Clean everything through and tell us whether it improves.

Why is my tumble dryer taking so long to dry?

Long cycles point to restricted airflow or a weak heater. Clean the lint filter and condenser, empty the water tank, and make sure the vent is not blocked or crushed. Let us know your model and how long a normal load now takes.

Why is my tumble dryer making a loud noise?

A rumbling, grinding, or squealing noise is usually a worn drum bearing, a jockey/tensioner pulley, or a fraying belt. Describe the noise and when it happens and the community can help you pin it down.

Not seeing your fault? Ask the community and get a tailored answer for your exact model.

Top Contributors

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your appliance.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Shop

Fix it yourself for less. Find the right part for your appliance and order it direct.

  • Search by your full model number
  • Genuine and compatible parts
  • Fast 1–3 day dispatch