Vacuum Cleaner Repair Forum
Upright, cylinder and cordless vacuums — loss of suction, brush bar, battery and blockage issues.
Recent Questions
Miele vacuum cleaner wand has cracked?
Bought a Miele vacuum cleaner (Triflex HX1) two years ago and the wand or hose has split and it's lost suction as a result. Really hoping it's a cheap fix.
Numatic vacuum cleaner brush roll jammed with hair
My Numatic vacuum cleaner, 2 years old — the roller is jammed solid with hair and won't turn. Is this something I can fix myself or do I need an engineer?
Samsung vacuum cleaner won't turn on
I've got a Samsung vacuum cleaner (Jet 75) that's about 6 months old and it's completely dead and won't power up at all. Is this a common fault on these?
Vax vacuum cleaner brush bar not spinning?
Bought a Vax vacuum cleaner (Air Stretch) a year ago and the floor head / brush roll has stopped turning. Would really appreciate any advice before I fork…
Miele vacuum cleaner making a loud whistling noise?
Bought a Miele vacuum cleaner 6 months ago and it's much louder than usual with a high-pitched whistle. Any idea what's causing this?
Vax vacuum cleaner cordless won't hold charge
Hoping someone can help with my Vax vacuum cleaner — the battery only lasts a couple of minutes, or won't charge at all. Is it worth repairing or should I…
Help - Gtech vacuum cleaner won't turn on
I've got a Gtech vacuum cleaner (Pro 2) that's about 6 months old and it's completely dead and won't power up at all. Grateful for any pointers, thanks.
Hoover vacuum cleaner brush bar not spinning
Hoping someone can help with my Hoover vacuum cleaner (Breeze) — the floor head / brush roll has stopped turning. Any idea what's causing this?
Shark vacuum cleaner pulsing on and off
Hoping someone can help with my Shark vacuum cleaner (Stratos) — the motor pulses on and off and won't run steadily. What should I check first?
Beko vacuum cleaner pulsing on and off
Hoping someone can help with my Beko vacuum cleaner (PowerClean VRT94929VI) — the motor pulses on and off and won't run steadily. Really hoping it's a…
Bissell vacuum cleaner has lost suction
Bought a Bissell vacuum cleaner (CrossWave) 6 months ago and the suction has dropped right off even after I've emptied it and cleaned the filter. Is this…
Miele vacuum cleaner brush bar not spinning?
Hoping someone can help with my Miele vacuum cleaner (Triflex HX1) — the floor head / brush roll has stopped turning. Really hoping it's a cheap fix.
Vax vacuum cleaner battery light flashing and won't run
Hoping someone can help with my Vax vacuum cleaner (ONEPWR Blade 4) — (cordless) the battery light flashes and it won't run. Is this something I can fix…
Bosch vacuum cleaner keeps cutting out, any ideas?
I've got a Bosch vacuum cleaner that's 3 years old and (cordless) it pulses on and off and cuts out after a few seconds. Would really appreciate any…
Bissell vacuum cleaner battery light flashing and won't run, any ideas?
I've got a Bissell vacuum cleaner that's just over a year old and (cordless) the battery light flashes and it won't run. Would really appreciate any…
Miele vacuum cleaner smells of burning, any ideas?
I've got a Miele vacuum cleaner (Complete C3) that's a couple of years old and there's a hot rubber/burning smell whenever I use it. Any idea what's…
Help - Bosch vacuum cleaner cutting out and overheating
I've got a Bosch vacuum cleaner that's a few months old and it shuts off after a while and gets really hot. What should I check first?
Gtech vacuum cleaner cutting out and overheating
I've got a Gtech vacuum cleaner (Pro 2) that's just over a year old and it shuts off after a while and gets really hot. Is it worth repairing or should I…
Russell Hobbs vacuum cleaner cordless won't hold charge, any ideas?
I've got a Russell Hobbs vacuum cleaner (RHHS3002) that's 3 years old and the battery only lasts a couple of minutes, or won't charge at all. Would really…
Numatic vacuum cleaner pulsing on and off
My Numatic vacuum cleaner, around a year old — the motor pulses on and off and won't run steadily. Is it worth repairing or should I just replace it?