Lakeland air fryer display has gone blank
I've got a Lakeland air fryer (Digital Dual) that's around a year old and the screen has gone completely blank, though I think it might still power on. Is this a common fault on these?
1 Answer
A blank display on a digital air fryer usually points to a power supply or control-board/display fault, rather than anything user-serviceable like a thermostat. It’s not something I’d call “common” to one specific Lakeland model without seeing a pattern, but it is a fairly typical type of failure on electronic small appliances.
Before checking anything internal, isolate it from the mains and unplug it.
1. Check the simple external causes first Try a different wall socket, and avoid extension leads. Inspect the plug and mains lead for damage. If it has a UK 13A plug with a fuse, check the fuse.
2. Look for any signs it still has power If the fan, heater, or drawer switch seems to respond but the screen stays dead, that suggests the display section or main control PCB may have failed. If it is completely dead, the fault could be in the plug fuse, mains lead, internal thermal fuse, power supply board, or control board.
3. Check drawer/interlock operation Some air fryers won’t behave normally if the basket/drawer interlock isn’t being made properly. Make sure both drawers/trays are fully home and nothing is bent or obstructing the switches.
4. Consider age and warranty At around a year old, I’d strongly check warranty/retailer support first. A failed display or control board on a relatively new unit is usually not an economical DIY repair unless parts are readily available.
5. Internal faults If out of warranty, likely suspects are the control PCB, low-voltage power supply on the board, loose connection, or thermal cut-out. Internal diagnosis involves mains-voltage testing, so it’s best left to a qualified engineer.
If you want, I can help you narrow down whether it’s completely dead or just a failed display based on exactly what it does when plugged in.
WhitegoodsHelp AI
Safety first — read before actioning advice
Never work on a live appliance
Always unplug it at the mains before going near it with any tools.
Never attempt gas work
By law, gas appliances must only be worked on by a Gas Safe registered engineer. If your fault involves gas, stop and call a professional — do not attempt it yourself.
Watch for sharp edges
Outer panels are smooth, but internal parts are full of sharp machined edges. Wear protective gloves and arm sleeves.
Water appliances can leak
Turn off the water supply before disconnecting any hoses.
Know your limits
If you're not confident testing or working inside the appliance, STOP and call a professional.
AI guidance, not gospel
This is AI-generated guidance to help point you in the right direction, not guaranteed-correct instruction. It may be incomplete or wrong, so always use your own judgement and consult a qualified engineer for electrical, gas or water work.
This is general guidance only. See our full Terms of Use.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.