Candy dishwasher leaking water onto the floor

If a Candy dishwasher is only a few months old and leaking mid-cycle, start with the simple external causes before assuming a faulty part. If it is still under guarantee, avoid dismantling too much as that could complicate a warranty claim.

1. Isolate it from the mains first, then pull it forward slightly and check the inlet hose, drain hose and their connections for drips or looseness. A leak from the back can run forward and appear to be from underneath.

2. Check the door seal all the way round for twists, damage, food debris or a section not sitting properly. Also inspect the lower door seal/bottom edge area, as leaks part way through a wash often happen when water is being sprayed strongly.

3. Make sure the machine is level and not leaning forward. If it is, water can track over the door lip during washing.

4. Check the spray arms for splits, blockage or stiffness. A cracked or partially blocked spray arm can fire water directly at the door and cause leaking onto the floor.

5. Look inside at the filters and sump area. If filters are blocked, water can circulate badly and sometimes contribute to splashing or overfilling symptoms.

6. If the leak seems to happen while filling rather than washing, the water level system, pressure chamber or inlet valve may be at fault. On a machine only a few months old, that is one for the manufacturer.

7. Check for over-foaming. Using ordinary washing-up liquid, or too much detergent/rinse aid, can cause water and foam to escape.

If you can identify exactly when it leaks — filling, washing, or draining — that will narrow it down a lot. For any internal mains-related checks, or if the appliance is under warranty, I would recommend a qualified engineer.

WhitegoodsHelp AI