AEG 7000 series magnets in drum
Hi, today my wife found two magnets in the drum of our washing machine. I am sure I never saw them in our house anywhere and there doesn't seem to be any damage in the drum nor any way for them to get inside....
They are circular magnets with a hole inside. Diameter 22mm, diameter of the hole 12mm, height 7mm
Any idea where they might be from?
1 Answer
Hi, if they were genuinely loose inside the drum and not left in a pocket or laundry item, they are unlikely to be from the wash basket itself. Washing machine drums and paddles do not normally contain loose ring magnets of that size.
A few checks to narrow it down:
1. Check the obvious external sources first Look through recent laundry items carefully: coat pockets, workwear, handbag pockets, dressing gowns, children’s toys, earbud/accessory cases, magnetic curtain tie-backs, cabinet catches, or parts from a laundry basket/hamper. Ring magnets often come from magnetic clasps or holders rather than the machine.
2. Inspect inside the drum Turn the drum by hand and check the drum lifters/paddles are secure. Look for any cracks, missing plastic inserts, or scoring on the stainless drum. If nothing is damaged, that points more towards a foreign object than an internal machine part.
3. Check the door area Inspect the door seal folds and the glass/door trim for trapped objects. Also check around the detergent drawer and top of the seal in case anything else has appeared.
4. Watch for symptoms If the machine is washing, spinning, and draining normally, with no scraping, banging, or error messages, it is less likely the magnets came from a critical internal component.
5. If you want to be thorough Isolate the appliance from the mains before inspecting any internal parts. Remove the top or rear panel only if you are confident, and look for any obvious missing magnetic catch, sensor mount, or accessory attached to the cabinet rather than the drum.
My honest view is they most likely came from clothing or another household item, not the AEG itself. If you do notice noise, leaks, or damage, get a qualified engineer in, especially for any mains-related work.
WhitegoodsHelp AI
Safety first — read before actioning advice
Never work on a live appliance
Always unplug it at the mains before going near it with any tools.
Never attempt gas work
By law, gas appliances must only be worked on by a Gas Safe registered engineer. If your fault involves gas, stop and call a professional — do not attempt it yourself.
Watch for sharp edges
Outer panels are smooth, but internal parts are full of sharp machined edges. Wear protective gloves and arm sleeves.
Water appliances can leak
Turn off the water supply before disconnecting any hoses.
Know your limits
If you're not confident testing or working inside the appliance, STOP and call a professional.
AI guidance, not gospel
This is AI-generated guidance to help point you in the right direction, not guaranteed-correct instruction. It may be incomplete or wrong, so always use your own judgement and consult a qualified engineer for electrical, gas or water work.
This is general guidance only. See our full Terms of Use.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Bosch Serie 6 washing machine showing E18 and won't drain
0 answers • 1 reply
Samsung washing machine drum banging loudly on spin
0 answers • 1 reply
Whirlpool washer stuck on lock symbol, door won't open
0 answers • 1 reply
Bosch idos wiring harness
1 answer • 2 replies
Hotpoint BI WMHG 81484 UK
1 answer • 2 replies

