Solved
AEG
L14800

Aeg L14800 washer dryer - how to get to the motor to check carbon brushes

DADaisyMaisy
Asked almost 7 years ago 9,148 views
0

I would like to check the carbon brushes but having removed the top and looked at the machine the housing seems to be in two parts with no easy access to the motor. Can you advise how to remove the back part of the housing on this machine so that I can access the motor?

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

AEG L14800 access to motor/carbon brushes requires cabinet removal

The problem
The owner wanted to inspect the carbon brushes on an AEG L14800 washer dryer but could not find straightforward access to the motor after removing the top panel. The machine appeared to have a two-part housing with no removable rear access panel.
Likely cause
The accepted reply indicates this model uses a design where the main cabinet has to be removed to reach internal components such as the motor. No actual motor or brush fault was confirmed in the discussion.
What fixed it
No repair was documented. The accepted advice was that access requires removal of the main cabinet and that this is an awkward design, making self-access likely more trouble than it is worth. Further diagnosis should be carried out by a suitably qualified appliance engineer.
Checks to try
  • Top panel removed
  • Rear access visually checked and found not to provide easy motor access

Safety: Do not dismantle further unless competent to do so; further diagnosis should be carried out by a suitably qualified appliance engineer.

Professional repair recommendedGenerated 19 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 7 years ago

It looks like you have one of the washing machines that has to have the main cabinet taken off to get to anything. Very awkward design. Probably more trouble than it's worth to try and look yourself if you can't just take off a back panel for access.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.