Strange Water Leak On Zanussi Washer Dryer
Hi, i have just brought a 2nd hand Zanussi WDJ 1094 Jet Stream washer dryer, it washes fine but when i put it into dryer mode water squirts from the cold water valve.\r\nThere are 2 valves on the cold inlet the one at the bottom has a black hoses about 12 dia, this goes to a square plastic box at the back of the soap drawer, this has an 12mm opening coming from it that looks as thought there should be a pipe attached to it but there isnt. any way when i put the dryer on water spurts from this opening. any one know why ?
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Zanussi WDJ 1094 Jet Stream leaks from condenser water feed area in drying mode
- The problem
- A second-hand Zanussi WDJ 1094 Jet Stream washes normally, but in dryer mode water squirts from an open-looking outlet on the square plastic box at the back of the soap drawer, fed by the lower cold-water valve.
- Likely cause
- The accepted reply says the dryer uses a constant cold-water trickle into the condenser chamber during tumble dry. The leak is therefore most likely due to a split hose or a blockage in the path into the condenser chamber causing water to escape.
- What fixed it
- Inspect the condenser water feed path used during drying for a damaged or detached hose and for any blockage into the condenser chamber. The exact repair was not confirmed in the discussion.
- Checks to try
- Observed that washing works normally
- Leak occurs only in dryer mode
- Water squirts from the opening on the square plastic box behind the soap drawer
- Lower cold-water inlet valve feeds this area via a black hose
- Accepted advice explained that a constant cold-water trickle is normal during condenser drying
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
1 Answer
On tumble dry, a condenser washer dryer will usually have a constant trickle of cold water running into a condenser chamber. The hot moist air from the laundry will be blown into this chamber where it mixes with the cold water trickle and condenses into water. It's then pumped out down the drain by the main pump.
If water is leaking, either the hose has a split, or maybe the pathway into the chamber is blocked?
Tips on finding a washing machine leak
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Zanussi washer dryer not filling with water. No error code and is turning etc.
1 answer • 3 replies
Zanussi Z816WT85BI washer dryer has caked on / baked on lint around the rubber seal
1 answer • 5 replies
New zanussi washer/dryer Z716WT83BI pump
1 answer • 3 replies
Zanussi Dryer Part Failure
1 answer • 9 replies
Zanussi WDT 1085 Washer/dryer, broken knob
1 answer • 1 reply
Zanussi Washer Dryer Wont Fill
1 answer • 1 reply
Zanussi Washer Dryer Beeped 3 Times
1 answer • 2 replies
Zanussi Wdt1085 Washer Dryer Timer Knob Loose
1 answer • 1 reply
Zanussi Wjs1265w Washer Dryer Error Code E10
1 answer • 2 replies
AEG washer/dryer tiny leak from humidity sensor
1 answer • 5 replies
