Washing Machines
Bosch
Varioperfect

Bosch washing machine only spins sometimes

M.m.c.barbour
Asked 4 days ago 22 views
0

My washing machine misses out the spin cycle sometimes but works other times

1 Answer

0
WA
WhitegoodsHelp AIAI Assistant
Answered 4 days ago

Intermittent spin faults on Bosch washing machines are often caused by something simple like drainage, load balance, or worn motor brushes on older models — but the exact cause needs narrowing down.

1. Check if it is actually draining properly If the machine doesn’t empty the water fully, it will usually refuse to spin. Watch what happens at the end of the wash. If water is left in the drum, check the pump filter for fluff, coins or hair grips, and make sure the drain hose isn’t kinked or pushed too far down the standpipe.

2. Consider load size and balance If it only misses spin with large towels, bedding, or single heavy items, the machine may be detecting an unbalanced load and aborting the spin. Try a rinse and spin with a mixed, medium-sized load and see if it behaves normally.

3. Check for motor brush wear Many Bosch machines with conventional motors can spin intermittently when the carbon brushes are worn. A common sign is that washing still works, but spinning becomes unreliable or weak. If your model has a brush motor, this is well worth checking.

4. Listen for the pump and motor If the pump runs but the drum just turns slowly and never builds up to full spin, that points more towards brushes, motor, tachometer, or control issues. If it repeatedly redistributes the load, it may be balance-related.

5. Note whether it fails on every programme If it spins on some cycles but not others, note exactly which ones. That can help tell whether it’s a drainage, sensor, or control issue.

Isolate the appliance from the mains before inspecting any internal parts. If the fault involves live electrical testing or you need motor/control work checked, it’s best handled by a qualified engineer. If you need parts, use the full model number from the rating plate and check with the Whitegoods Help Spare Parts Shop.

WhitegoodsHelp AI Assistant

You may also find this guide on our main site helpful: "Washing Machine Leaks On Spin" – https://www.whitegoodshelp.co.uk/washing-machine-leaks-on-spin/

This answer was generated automatically by the WhitegoodsHelp AI Assistant. It is not provided by an engineer or any other qualified person, may be inaccurate or incomplete, and is not professional or technical advice. Do not rely on it. Always use your own judgement and consult a qualified engineer before carrying out any electrical, gas or water work. Use is entirely at your own risk. See our full Terms of Use.

SAFETY FIRST: READ BEFORE ACTING ON THIS GUIDANCE

  • Never work on a live appliance

    Always unplug it at the mains before going near it with any tools.

  • Never attempt gas work

    By law, gas appliances must only be worked on by a Gas Safe registered engineer. If your fault involves gas, stop and call a professional. Do not attempt it yourself.

  • Watch for sharp edges

    Outer panels are smooth, but internal parts have sharp machined edges. Wear protective gloves and arm sleeves.

  • Water appliances can leak

    Turn off the water supply before disconnecting any hoses.

  • Know your limits

    If you are not confident testing or working inside the appliance, stop and call a professional.

  • AI guidance, not guaranteed

    This response is generated automatically by the WhitegoodsHelp AI Assistant. It is not professional or technical advice, may be incomplete or wrong, and must not be relied upon. Always use your own judgement and consult a qualified engineer before any electrical, gas or water work.

This is general information only and is not professional advice. The WhitegoodsHelp AI Assistant is not an engineer and is not qualified. See our full Terms of Use.

Your Answer

Sign in to share your expertise and post an answer.