New Pump(Cheap 3Rd Party One) Is It Faulty?

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Replacement washing machine pump connector query

The problem

A replacement third-party pump for a Beko washing machine had exposed cable pins rather than the enclosed plastic connector used on the original pump. The pins came out when the cable was attached but pushed back into place. A thin copper strand around the pins also came loose, and the user asked whether this indicated a fault or missing earth.

Likely cause

The accepted reply indicates the loose copper strand and exposed pins did not, by themselves, suggest the pump was faulty. The discussion says most UK washing machine pumps are now all-plastic and are not earthed, and that a true earth connection would normally be a clearly separate earth tab on pumps with metal parts.

What fixed it

No repair was documented. The accepted advice was that the pump probably was not faulty on the basis described, and that an earth would only be required if there were an obvious dedicated earth tab. The exact condition of the replacement pump was not otherwise confirmed.

Checks to try

• Original pump had enclosed plastic-covered connector pins
• Replacement pump had exposed pins
• Pins came loose during cable attachment and were pushed back into place
• Thin copper strand around the metal pins came loose