Solved
Indesit
IWC81481

Indesit IWC81481 bearing size?

GLglayzell
Asked about 8 years ago 4,690 views
0

Hi, can anyone help with my bearings. I cant seem to find the bearings anywhere online. My machine is making a racket and I need to have a go at replacing the bearings and I cant afford to get an engineer out.

The machine is an Indesit IWC81481.

Can anyone help me out in finding the correct bearings?

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Indesit IWC81481 noisy drum bearings not available separately

The problem
The Indesit IWC81481 washing machine was making a loud noise, and the owner was trying to find replacement drum bearings.
Likely cause
The discussion strongly suggests worn drum bearings, but the key point confirmed by parts availability checks was that separate bearings were not listed for this model. Only the complete tub and drum assembly appeared to be available, indicating a sealed, non-serviceable drum assembly.
What fixed it
Forum replies advised that if bearings were available they would be listed as spares, but for this model only the full tub and drum assembly could be found. As that assembly was said to cost about the same as a new machine, the owner decided they would need to replace the washing machine rather than carry out a bearing-only repair.
Checks to try
  • Spare parts availability for Indesit IWC81481 was checked
  • Only the complete tub and drum assembly was found, not separate bearings
Parts or tools mentioned
  • Complete tub and drum assembly
Replacement recommendedGenerated 6 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

5 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered about 8 years ago

Hello there. If they are available you should be able to get them here - Ransom Spares - however, many modern washing machines do not have drum bearings that can be replaced. The majority are now manufactured with completely sealed drums that cannot be taken apart at all. It's a sad indictment of modern throwaway appliances.

Whitegoods Help — appliance repair expert and forum host.
0
WH
WhitegoodshelpVerified Engineer
Answered about 8 years ago

Yes it looks like they are not available. I've just gone through all of the spare parts that are available for the Indesit IWC81481 and all they have available is the entire tub and drum assembly which is a similar cost to a new washing machine. The manufacturers do not want us to repair them any longer, they are mostly geared up to sell the finished product in as big a quantity as possible and to make some profits selling fast-moving spare parts. All of the major components of a washing machine now tend to be ridiculously priced compared to the cost of a new washing machine. All of the parts that used to be repairable by stripping it down and replacing individual parts such as the pump, motor, drum, and drum bearings mostly sealed units now at greatly increased cost.

To be fair, the new washing machines are ridiculously cheap, so there's a fair argument that it is not the parts that are expensive it is the appliances that are cheap. However, there's no excuse for designing them in such a way that you cannot repair them. This is done purely to make them cheaper to repair. Many manufacturers claim that the welded drums are welded to make them stronger. In all honesty I find that laughable.

If your washing machine is only a few years old you might be to claim it wasn't of satisfactory quality. However, that is the long and difficult road to travel because the retailers and manufacturers are very resistant to that concept and will not accept it unless you are very persistent. If it was only 18 months old for example and is now beyond reasonable repair I would say you have an excellent case. But it would depend on exactly how old it is and how often it has been used.

Whitegoods Help — appliance repair expert and forum host.
0
GL
glayzell
Answered about 8 years ago

Thanks for the help.. I wondered why I couldn't find the part. The machine has only had about 3 years of use, but we do have 7 children between us so it is pretty much on all the time... I guess I will have to get a new machine. I think it was only £200 new.

Is there a top tip for reasonably priced machine that has replaceable parts?

0
WH
WhitegoodshelpVerified Engineer
Answered about 8 years ago

Thanks for that. Yours is a great example of how a washing machine not lasting very long is actually not an issue when all the facts are taken into account. £200 to wash for 7 people for 3 years is acceptable in my opinion. That’s a lot of washing.

Had the washing machine cost £450 and had only washed for one old pensioner I would say it’s not good enough. It’s all about looking at the whole picture.

Whitegoods Help — appliance repair expert and forum host.
0
GL
glayzell
Answered about 8 years ago

Yeah, I cant really complain.. 7 children + 2 adults. We swim, school clothes, work clothes etc. Probably an average 3 loads a day. I just would have preferred a £20 repair to a £200 machine.

Thanks again though for the help.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your Indesit.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your Indesit needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice