Solved

Not starting Cycle

DADavid1971
Asked over 7 years ago 9,104 views
0

Hi Chaps,

Am new to the forum, I was wondering if you could give me some points on why my Beko WMB61431s won’t start. The display shows the time but does not start, I had a similar problem with the timer counting down and I replaced the bushes and this solved the problem. I have again replaced the bushes, but this time the problem still remains.

Hope you can help.

Regards

David

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko WMB61431s would not start due to faulty door switch

The problem
Beko WMB61431s washing machine displayed the programme time but would not start a cycle. The original poster said the machine normally calls for water, then drains and starts, but it was not reaching that stage. Motor brushes had already been replaced again, but this did not cure the fault.
Likely cause
Faulty door switch/door lock not making contact. This was identified by the original poster and later confirmed by the successful repair.
What fixed it
Replace the door switch/door lock assembly.
Checks to try
  • Observed that the display showed the time but the cycle would not start
  • Confirmed the machine was not reaching its normal fill/drain/start sequence
  • Replaced motor brushes, with no improvement
  • Found that the door switch was not being made
  • Replaced the door switch
Parts or tools mentioned
  • Motor brushes
  • Door switch/door lock

Safety: Isolate the appliance from the electricity supply before replacing parts. Further diagnosis should be carried out by a suitably qualified appliance engineer.

Confirmed fixedGenerated 9 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

7 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 7 years ago

Hello. If the timer is counting down isn't that a delayed start feature?

Whitegoods Help — appliance repair expert and forum host.
0
DA
David1971
Answered over 7 years ago

What usually happens in the machine calls for water, then it drains and it starts.

but it’s not getting to this stage.

0
DA
David1971
Answered over 7 years ago

Think I have found the problem, the door switch is not being made, got a new one on order.

0
WH
WhitegoodshelpVerified Engineer
Answered over 7 years ago

Sorry I just re-read your question. I didn't pick up on the timer counting down being a previous fault not this one. Yes the door lock is a common cause of a washing machine not working at all, but there are many others. Let us know if the new door lock fixes the fault. If not check my help article out Washing Machine Won’t Start

Whitegoods Help — appliance repair expert and forum host.
1
DA
David1971
Answered over 7 years ago

Door switch fixed the problem.

0
WH
WhitegoodshelpVerified Engineer
Answered over 7 years ago

Excellent. Thanks for the update.

Whitegoods Help — appliance repair expert and forum host.
0
DO
Doogs
Answered over 7 years ago

Hi, problem with my beko washing machine is that once you choose a cycle it makes the usual starting sound and starts then 3 seconds later cuts out like a faulty connection any advice would be appreciated, cheers!

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your appliance.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your appliance needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice