Solved
AEG

odd behaviour from AEG washing machine puump

CRcrisisguy
Asked almost 7 years ago 2,721 views
0

have an AEG 86810

the drain pump runs if there is no water in the machine. If i put some water in the drum, close the door and then put on the drain cycle the pump wont run

ive cleared out the filter and the pump impeller is clear of debris. I can see it run with the filter off. the moment i put the filter back in and add some water it stops running

i cant work out why

any suggestions

4 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 7 years ago

Is the pump impeller actually spinning and can it be easily stopped with a screwdriver (gently)? What I’m getting at is if the impeller was loose on the shaft it might appear to spin but would easily be stopped by the weight of water.

Whitegoods Help — appliance repair expert and forum host.
0
CR
crisisguy
Answered almost 7 years ago

the impeller cant be stopped easily with a screwdriver so its not spinning on the shaft. and I can hear the pump motor does not cut in when water is present - even a small amount seem to trigger some sort of sensor that cuts out the pump

0
WH
WhitegoodshelpVerified Engineer
Answered almost 7 years ago

It sounds like there's nothing wrong with the pump then. Sadly I can't think of anything right now that would explain your problem. I know that some washing machines cut the pump when there is no water inside, but that's the opposite. The only thing that changes when water is inside the machine is that the pressure switch is activated. But I've never heard of the pressure switch cutting power to the pump. Obviously when water is inside the washing machine then clearly power to the pump (when required) is essential. I have an article about how the pressure system works, but as I haven't had this issue before I'm not sure how helpful it is likely to be How a washing machine controls water levels

Whitegoods Help — appliance repair expert and forum host.
0
CR
crisisguy
Answered almost 7 years ago

Appreciate the help Andy

I think next step is to tear it down

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your AEG.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your AEG needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice