Solved
Samsung

[samsung] Paddle thing behind filter

RORobShep
Asked about 6 years ago 6,737 views
0

hi,

we have a Samsung P1253S

At the back of the filter Compartment at the bottom is some kind of paddle thing.

it sits on the end of a spindle and my guess is that is mashes cruft around so as not to block the drainage.

the paddle has come off the spindle and makes a horrendous clanking noise as it occasionally catches.

Ive removed and the washes operates fine (On a spin) for now.

Some questions if I may.....

what are the consequences of this thing missing from the washer?

is it repairable? Or replaceable?

is it part of a field replacement kit for a larger component maybe?

any insight, gratefully received.

thanks

Rob

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Samsung P1253S loose part behind filter identified as pump impeller

The problem
On a Samsung P1253S washing machine, the paddle-like part behind the filter had come off its spindle and was making a loud clanking noise when it caught intermittently. The machine would still spin with the loose part removed.
Likely cause
The loose 'paddle thing' was identified as the drain pump impeller. If it has come off the shaft, the pump is unlikely to pump water properly. A complete pump replacement was suggested as the usual remedy.
What fixed it
The accepted diagnosis was that the part was the pump impeller. The original poster then identified the correct spare by searching for that term and decided to replace the pump with a new pump kit.
Checks to try
  • Loose paddle-like part found behind the filter compartment at the bottom of the machine
  • Part was sitting on the end of a spindle
  • Part had come off the spindle and caused a clanking noise
  • Machine operated on spin with the loose part removed
  • Accepted reply identified the part as the pump impeller
Parts or tools mentioned
  • New pump kit

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 9 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

4 Answers

Accepted Answer
1
WH
WhitegoodshelpVerified Engineer
Answered about 6 years ago

Hi. I might be misunderstanding but it sounds like the pump impeller which if it’s come off the shaft will mean the pump will no longer pump water?

Whitegoods Help — appliance repair expert and forum host.
0
RO
RobShep
Answered about 6 years ago

Great,

You are right. Thanks a lot.

Knowing the right terminology helps.

an image search for leads me to match it up exactly.

now I know what’s up I can find spares or help or both.

thanks again

Rob

0
WH
WhitegoodshelpVerified Engineer
Answered about 6 years ago

Usually if the impeller has come off you will need a complete new pump.

Whitegoods Help — appliance repair expert and forum host.
1
RO
RobShep
Answered about 6 years ago

Thanks

A new pump kit is £40 so I’ll swap it out.

couldn’t find one on the affiliate site above but have found one in the U.K.

Cheers.

Your Answer

Sign in to share your expertise and post an answer.