Solved

Washer/Dryer Condenser Clogging

CRCrinkle
Asked over 3 years ago 5,130 views
0

I have regularly needed to de-clog the condenser in an LG F1480 washer/dryer in the 10 years it has been running. Replaced various other bits to keep it going and it has been a good machine. Whilst I know how to de-clog it, it is getting a bit boring now!! Is this issue likely to still occur on newer machines? Do they all still use the same technique? Because it seems to me that the water used to cool the condenser needs to run much more frequently or for a longer period to stop the fluff clogging up. Is there a washer/dryer design that is less susceptible to this problem or maybe easier to disassemble? Considering a newer LG model to replace the F1480, but don't want the same problem. Thank you!

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

LG F1480 washer/dryer condenser repeatedly clogging

The problem
The owner of an LG F1480 washer/dryer reported that the condenser has needed regular de-clogging over about 10 years of use and asked whether newer washer/dryers still suffer the same issue or use the same drying system. The machine also had a display fault, prompting consideration of replacement.
Likely cause
The accepted reply said washer/dryers generally use a very similar condensing system and are prone to fluff and lint build-up inside the heater housing, fan housing and rear condensing chamber. The suggested reason is that the cooling water only trickles through the condensing chamber and is not strong enough to flush lint away effectively, especially where damp internal surfaces encourage build-up.
What fixed it
No specific repair or design improvement was confirmed in the discussion. The accepted advice was that this is a common fundamental weakness of washer/dryer designs, and if replacing the machine it may be worth considering a different brand rather than another LG. The exact repair for the existing machine was not discussed or confirmed.
Checks to try
  • Repeated need to de-clog the condenser over 10 years
  • Display fault also noted on the LG F1480
  • Accepted reply identified likely clogging points as the heater element housing, fan and condensing chamber

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 13 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

2 Answers

Accepted Answer
1
WH
WhitegoodshelpVerified Engineer
Answered over 3 years ago

Hello Crinkle. Yes, my feeling is that they all work on virtually exactly the same system. They all suffer from this fundamental flaw of getting clogged up inside the heater element housing, inside the fan, and inside the condensing chamber at the back. I would expect that some are more susceptible to it than others, though.

The way they work is that cold water only trickles inside the condensing chamber. The water flow is nowhere near strong enough to flush the fluff properly down into the water pump. The fluff and lint created during the drying process also snags on parts inside the heating chamber, and even the fan housing. The fact that these places are often constantly damp assists this clogging.

What would be needed is a filter to catch all of this lint and fluff, like you have inside tumble dryers. As far as I know, no one has tried it. Either because they haven't thought that it is necessary, or something about the design of the washing machine that's also a tumble dryer makes it very difficult or impossible to build in.

Another possible help would be a drying maintenance cycle that flushed water properly through the chamber. I'm not sure if anyone's actually done this or not. But they can't really flush water through the heating chamber or the fan.

To be fair, tumble dryers commonly also get severely clogged up as well due to poor design and function, or users not cleaning filters out properly or often enough. This fluff and lint sometimes even catches fire.

I Personally think washer dryers are rubbish. But if they are the only option, and you definitely need a tumble drying function, I would definitely try a different brand altogether. I would look at either Bosch or AEG though I couldn't tell you whether or not they would be any better. They have good reputations though.

Whitegoods Help — appliance repair expert and forum host.
0
CR
Crinkle
Answered over 3 years ago

Thanks very much for your reply Andy. I appreciate it! The LG is my son's machine and there is also something wrong with the display - I think it has done it's 10 year service. We have a much older Miele washer which is very reliable - only a washer though - no dryer! It's got through several sets of brushes and one pair of dampers so far. Maybe time to recycle that one as well!

Your Answer

Sign in to share your expertise and post an answer.