Solved
Indesit

Indesit Wg113D Leaking

FRfreedomrun
Asked over 14 years ago 2,893 views
0

My first post here, so hope i'm asking for some advice in the correct place - INDESIT WG113D. Has developed a leak at the rear of the drum, looks like it's coming from the tension bolt, this needs a large Torx head driver to tighten. Could there be a seal behind this that may have perished or should i just tighten up this bolt, does'nt seem to be any locking nut on this bolt, so it may have come loose after time? Any advice please, thanks.

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Indesit WG113D leak from rear of drum area

The problem
An Indesit WG113D washing machine developed a leak at the rear of the drum, appearing to come from the area of the large Torx tension/pulley bolt.
Likely cause
The accepted reply says that if the leak is from the drum pulley bolt area, the drum bearing seal may have failed. This is presented as a likely diagnosis rather than a confirmed repair.
What fixed it
No confirmed repair was documented. The accepted advice was to identify the exact source of the leak, with the strongest supported diagnosis being a failed drum bearing seal if the leak is from the drum pulley bolt area. Further diagnosis should be carried out by a suitably qualified appliance engineer.
Checks to try
  • User observed leak at the rear of the drum
  • User believed the leak looked as if it was coming from the tension/pulley bolt area
  • Accepted reply linked the leak location to a possible drum bearing seal failure
Parts or tools mentioned
  • Large Torx head driver

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 16 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 14 years ago

Hello freedomrun. If it's the drum pulley bolt the drum bearing seal may well have failed. I have some tips on locating a washing machine leak here

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your Indesit.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your Indesit needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice