Solved
Indesit

Indesit Wil153 Drum Damaged Mid-Wash

RORoz JC
Asked over 12 years ago 2,371 views
0

Hello,

Just wanted to ask for some advice here.

I have an Indesit WIL153 washing machine that I've had now for so many years now I can't remember.

Anyway, I put a load of clothes in as I normally do and started the wash and towards the end of the cycle, there was a loud crunching noise, so I rushed out to have a look and noticed that the drum had stopped moving and if it did, it sort of gave off a grinding noise. I immediately stopped the cycle and pulled out the clothes and checked the inside of the drum.

I noticed that the drum had been damaged quite badly. I'll add some photos to show the damage I'm talking about.

http://img.photobucket.com/albums/v293/RozzaC/IMG_20140503_173824.jpg

http://img.photobucket.com/albums/v293/RozzaC/IMG_20140503_173813.jpg

Now, to me, it doesn't look like it can be repaired, so I'm thinking that the only thing I can do is get a new one.

But I thought I'd come and ask here first before I take that route.

Any advice would be greatly appreciated.

Thanks

Rory

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Indesit WIL153 drum damaged after grinding noise mid-cycle

The problem
During a wash on an Indesit WIL153, a loud crunching noise occurred near the end of the cycle. The drum then stopped moving properly and made a grinding noise. After unloading, the inner drum was found to be badly damaged.
Likely cause
The accepted reply said the damage looked consistent with a £1 coin or similar object getting inside and damaging the drum. This is presented as a probable cause rather than a confirmed finding.
What fixed it
Replacement of the washing machine was advised rather than repair. The accepted reply stated the repair would be very expensive and that a new drum could not be found listed, with the outer tub listed as obsolete.
Checks to try
  • Observed loud crunching noise near end of cycle
  • Drum stopped moving properly and made a grinding noise
  • Visual inspection showed severe drum damage
Parts or tools mentioned
  • Drum
  • Outer tub

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Replacement recommendedGenerated 12 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 12 years ago

Hi, looks like what happens when a £1 coin or similar gets inside. It will be very expensive to fix and if you've had it a long time it's not worth trying to sort this out. I can't even find a new drum listed, the outer tub is listed as obsolete.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your Indesit.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your Indesit needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice