Beko Wmb81445Lw Clothes Still Wet After Spin

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko Wmb81445Lw poor spin drying leaving clothes wet

The problem

A Beko Wmb81445Lw, about 12 months old, was leaving clothes very wet after the wash and even after spin cycles, despite a 1400 spin setting. The filter had already been checked and was not blocked. The user also noted that switching the power off as a reset seemed to help once.

Likely cause

The strongest diagnosis in the discussion was a partial blockage restricting water flow during draining, possibly in the drain path such as the spigot between the drain hose and the u-bend. Another possible cause suggested was poor load balancing preventing the machine reaching full spin speed, but this was not confirmed.

What fixed it

Recommended action was to check for partial or intermittent blockages in the drain system, including less obvious points such as the u-bend spigot, and to review loading to ensure the machine can balance properly on spin. No specific repair was confirmed in the thread.

Checks to try

• Filter checked and reported clear
• Observed clothes still very wet after wash and after additional spin cycles
• Power cycled/reset once and this appeared to help
• Advice given to check for partial drain blockages including the u-bend spigot
• Advice given to consider whether load balancing was affecting spin performance