Ignis Washer Suddenly Doesn't Work... As Silent As The Grave
Hello and thanks in advance to anyone that will help.
I have an IGNIS washer that suddenly doesn't work anymore.
I select a program, push ON but nothing happens, washer doesn't lock the door nor start...
I can't find the model number http://i.imgur.com/f3ZBLYr.jpg http://i.imgur.com/P9YUA1s.jpg http://i.imgur.com/LqbDpxY.jpg http://i.imgur.com/YvFtjUB.jpg
I checked 1) socket with a lamp, working 2) different programs, nothing works
It was working perfectly before, no prior warning.
I don't know if it is related but... Recently I plugged a lamp that had a faulty cable that caused the house "main switch for plugs" (I don't know the technical name) to go off. However all other appliances are working fine. As far as I know that switch works like a fuse...
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Ignis AWP011 washing machine completely dead with no door lock or start
- The problem
- The Ignis washing machine, identified in the discussion as likely model AWP011, suddenly stopped responding. After selecting a programme and pressing on, nothing happened: the door did not lock and the machine did not start. The owner reported no prior warning signs.
- Likely cause
- The discussion supports only a general diagnosis of a completely dead machine after basic power checks. No specific failed part or exact fault was confirmed.
- What fixed it
- The accepted advice was to confirm the supply by trying the washing machine in a different socket and to carry out basic non-start checks. The owner then stated they were about to buy a new washer. No repair to the existing machine was documented.
- Checks to try
- Socket tested with a lamp and found working
- Different programmes tried with no response
- Advised to try the washing machine in a different socket
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
3 Answers
Model number looks like AWP011
If you have plugged a lamp in the same socket and the lamp works then it implies that the socket is okay. As a double check you could also try plugging the washing machine into a different socket.
If the machine is dead, follow this article to check all the basics - washing machine won't start
Need Professional Help or Spare Parts?
Hi, Check out my article here 5 tips for buying a new appliance
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Ignis FL800S (Whirlpool design) starts and stops spinning
1 reply • Solved
Ignis Ig 95 La
2 replies • Solved
Hisense washing machine not working
1 reply
No water in the drum after EF3 fault
4 replies
Hisense washing machine 001 code
6 replies
LG F1222TD PCB
5 replies
Bosch series 6 washer / drier stuck on 0.00 time and will not respond to any button
1 reply
Miele WEG365 WCS: drain fault and pump cavitation after transport - looking for W1/PowerWash expertise
2 replies
Water leaking from drain filter
1 reply
Water leaking from drawer of Meile washing machine
1 reply