Solved
Indesit

Indesit Iwb71250. Stresssssss

RHrhia1993
Asked almost 11 years ago 4,896 views
0

My washing machine started leaking about a week ago, I put it on a quick wash with a bed set in to test it & it flooded but looked like it had a few soap suds in it but not enough that there were bubbles. I've turned it on its side & checked the drain hose, thats fine, the filters cleared (there were a few coins in the pipe) but i did it earlier & it seems to be coming from the middle of the machine at the top. I cant get my hand round the middle of the drum on its side but the pump i can see going from the detergent drawer to the drum is dry. The drum itself is dry.

I'd really appreciate some help, i'm really stressed out about it.

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Indesit IWB71250 leaking during wash; leak source not identified

The problem
The Indesit IWB71250 washing machine began leaking about a week earlier. On a quick wash with a bed set, it flooded. The owner reported the water seemed to be coming from around the middle/right side near the top of the machine, but no obvious wet hose or component was visible after tipping the machine.
Likely cause
The exact cause was not confirmed. The discussion only supports that the leak could be from any of several places and that the source had not yet been located by inspection.
What fixed it
Recommended action was to remove the top lid and carefully examine the machine to trace the leak source. The thread does not document a confirmed repair or the exact leaking part.
Checks to try
  • Drain hose checked and reported fine
  • Filter cleared
  • A few coins were found in the pipe
  • Visual inspection suggested water from the middle/right side near the top
  • Pipe visible from the detergent drawer to the drum was reported dry
  • Drum itself was reported dry

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 6 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

4 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 11 years ago

Washing machines can leak from dozens of different places, it's down to carefully examining everywhere to find the leak

Whitegoods Help — appliance repair expert and forum host.
0
RH
rhia1993
Answered almost 11 years ago

I've seen it comes from the middle, around the right side, but when we tip it after it's washed to see if there are any wet tubes etc, there doesnt seem to be anything obvious. I cant get the top off either?

0
ED
edhorwood
Answered almost 11 years ago

I thought you just removed the screws at the back of the lid, then slide the lid backwards and lift off? Try searching youtube and you should see. It isn't easy to see where it's leaking from with the lid on.

0
WH
WhitegoodshelpVerified Engineer
Answered almost 11 years ago

Yes all washing machine lids I've seen have 2 screws which are removed and then the lid is knocked and slid backwards to remove.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your Indesit.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your Indesit needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice