Solved

Washing machine sometimes leaves small puddle of water on floor

GAgav1977
Asked about 10 years ago 980 views
0

I have a Hotpoint WMFUG 842 about 1 year old. Most of the time it is absolutely fine but on the odd occasion there is a small puddle of water on the floor which occurs towards the end of the cycle. It tends to happen on the clean out program also but again, not every time. I think the water is clean, it looks it and there is no smell and it seems to be coming out from the front of the machine. I just assumed it was the door seal but not sure as the seal seems fine. Does anyone know what may be causing this as it is baffling me as to why it only ever occasionally happens.

Thanks

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Intermittent small leak from front of Hotpoint WMFUG 842

The problem
A Hotpoint WMFUG 842, about 1 year old, occasionally leaves a small puddle of clean-looking water on the floor towards the end of the cycle. The leak appears to come from the front and also sometimes happens on the clean-out programme, but not on every wash.
Likely cause
The accepted advice was that the most likely cause to check first is a small hole or damage around the inner door seal, possibly higher up where it is less obvious. Another forum reply suggested a worn water dispenser rubber hose rubbing on a metal edge, but this was not confirmed for this machine.
What fixed it
Inspect the door seal carefully all the way round for a small split or hole. If no fault is visible and the leak remains intermittent, the exact source was not confirmed in the discussion. Further diagnosis should be carried out by a suitably qualified appliance engineer.
Checks to try
  • Door seal visually checked by the owner and appeared fine
  • Advised to examine the full inside of the door seal carefully for a small hole
Cause identifiedGenerated 20 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

2 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered about 10 years ago

Carefully examine all round the inside of the door seal in case there's a small hole somewhere highish up. Other than that it might be difficult to track the cause o f the leak with it being so small and intermittent. Check out my article here for 5 tips on how to find a washing machine leak.

Whitegoods Help — appliance repair expert and forum host.
1
DA
davidmchan
Answered over 8 years ago

I had the same problem. it's the water dispenser rubber hose just under the soap dispenser, it's rubbing to the metal edge during washing cycles it will eventually cut through the rubber hose and cause water leaks when water is going through the dispenser. Replace the rubber hose and flaten part of the matel edge that may touch the rubber hose with a pillar.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your appliance.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your appliance needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice