Solved

Water drains back in drum after wash has completed

PAPaul Morter
Asked almost 10 years ago 8,285 views
0

Hi we have recently purchased a Hotpoint Ultima S-line washing machine - although generally pleased water seems to be drains back into the drum after the wash cycle has been completed and the assiocated clothes removed.

The water is a brownie colour ... any thoughts anyone?

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Hotpoint Ultima S-line water draining back into drum after wash

The problem
After the wash cycle had finished and the clothes were removed, brown-coloured water was appearing back in the drum of a Hotpoint Ultima S-line washing machine.
Likely cause
The accepted reply says this is almost certainly due to the drain hose being installed incorrectly, allowing waste water poured into the sink to run back into the washing machine.
What fixed it
Check and correct the washing machine drain hose installation to prevent sink waste water running back into the drum. The thread was marked solved, but the exact corrective work carried out was not confirmed in the discussion.
Checks to try
  • Brown-coloured water reappearing in the drum after the wash had completed
  • Accepted advice identified incorrect drain hose installation as the likely cause
Cause identifiedGenerated 14 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 10 years ago

Hello Paul. This is almost certainly caused by an incorrectly installed washing machine drain hose, allowing water that's poured into the sink to run down into the washing machine. It's explained fully in my article on Whitegoodshelp - Washing machine drum fills with water when switched off

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.