Solved
Indesit

indesit iwe8123

ROrob260173
Asked over 9 years ago 2,804 views
0

hi all, help if possible, washer has started making an horrendous knocking noise while on spin only, have checked weights and all tight and have removed drain pipe and cleaned out and cant find any evidence of a foreign object between inner and outer drums. no noise on any other part of the wash cycle and cant figure out whats wrong. also no excessive play on inner drum to indicate bearing wear. chears.

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Indesit IWE8123 knocking noise on spin, likely drum weight issue

The problem
The Indesit IWE8123 washing machine developed a very loud knocking noise on spin only. The drum weights already checked by the user were reported tight, the drain hose was removed and cleaned, no sign of a foreign object was found between the inner and outer drums, and there was said to be no excessive play in the inner drum to suggest bearing wear. No noise was reported during other parts of the wash cycle.
Likely cause
The accepted reply said a knocking noise is almost always caused by a loose drum weight, possibly one that is less accessible such as a front or underside weight. Other causes were mentioned as possible, but none were confirmed in the thread.
What fixed it
Recommended action was to inspect for a loose, less accessible drum weight and, with the machine disconnected from the mains and the lid removed, see whether the noise can be reproduced by shaking the outer drum from side to side. The exact repair was not confirmed in the discussion.
Checks to try
  • User checked drum weights and found them tight
  • User removed and cleaned the drain pipe
  • User found no evidence of a foreign object between the inner and outer drums
  • User reported no excessive play in the inner drum
  • Accepted advice suggested shaking the outer drum side to side with the machine disconnected from the mains and lid removed

Safety: Disconnect the machine from the mains before removing the lid or carrying out checks. Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 16 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 9 years ago

Knocking noise is almost always a loose weight. There could be a more inaccessible weight on the front or underneath the main drum. With the machine disconnected from the mains and the lid off can you replicate the noise by shaking the outer drum from side to side? Other than that noises can come from so many places. All the ones I can think of are in this article Noisy washing machine solutions

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your Indesit.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your Indesit needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice