Solved
Indesit

Indesit iwc 6153 override door lock

MIMiffySnow
Asked almost 9 years ago 4,275 views
0

My problem is that I cannot open my washing machine door and I believe it is the lock which is at fault not the door's physical mechanism. I need help to override the lock or to know how to break off the interlock without damaging anything else.

Key points

Machine tripped electrics or electrics tripped causing an error message of all lights flashing.

Machine was empty of water.

The door lock light remained on, I tried every combination of cycle and the light always remained on.

Leaving the machine off for hours does not reset it.

I have cleared the drain.

I have removed the control board and no visible capacitors blown.

I have tried using a string to open the door.

I have removed the lid and disconnected the power from the interlock.

If I pull the handle the metal hook moves easily, I can feel this when touching the interlock.

I have tried bashing the interlock in case this releases it.

I have checked the manual for any override codes.

Any help gratefully received in forcing the door open or how best to remove the interlock from the inside.

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Indesit IWC 6153 door stuck locked after electrics trip

The problem
The Indesit IWC 6153 washing machine door would not open. The machine had previously tripped the electrics or the electrics tripped during use, after which all lights flashed. The drum was empty of water, the door lock light stayed on continuously, and leaving the machine switched off for hours did not reset it.
Likely cause
Most likely a failed or jammed door lock/interlock. This was suggested by the persistent lock light and the accepted reply stating that the door lock sometimes has to be broken off. No further repair diagnosis was confirmed in the thread.
What fixed it
The accepted advice was that sometimes the door lock has to be broken off to gain access. The exact removal method and any subsequent repair were not documented. Further diagnosis should be carried out by a suitably qualified appliance engineer.
Checks to try
  • Machine was empty of water
  • Drain was cleared
  • Control board was removed and no visibly blown capacitors were seen
  • Tried string method to open the door
  • Removed lid and disconnected power from the interlock
  • Checked that the handle moved the metal hook
  • Tried different cycles and the door lock light always remained on
  • Checked the manual for override codes

Safety: Do not bypass or defeat the door interlock. Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 17 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

2 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 9 years ago

Sometimes you have to break off the door lock. I have an article on this issue Washing Machine Door Will Not Open

Whitegoods Help — appliance repair expert and forum host.
1
MI
MiffySnow
Answered almost 9 years ago

Thank you.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your Indesit.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your Indesit needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice