wilkins Servis model S MK15 Info needed

Hello Andy , It was a UK machine made at the Darlaston works between 1952 to 1956 I think but could be wrong about the dates, By what was then Wilkins & Mitchell LTD, I think they started out making industrial press and stamping machines upto 6000 tonnes, the Wilkins & Mitchell name was changed to Wilkins Servis and then to just Servis. I love old washing machines made by this firm and early Hotpoint's too, they were built like tanks made to last and made with easy servicing in mind. I am having problems finding replacement bearings for the hand cranked mangle and agitator disc drive shaft, the drive shaft will be the most difficult because it has got to be water tight, could turn out to be a bit of a nightmare, if I can I will post before and after photo's of the completed machine, it is very important to me that I do get the machine in full working order because my mother has been diagnosed with a memory illness which will only get worse with time, anything that can trigger deep memories will I have been told help to postpone the illness.Thanks for taking an interest Andy and a merry christmas to you and all that read this post.

Wow. That makes it around 60 years old. They were all built like tanks then However, Servis have gone bust at least twice since then. I would think it almost impossible to get any new spares for any washing machine that old. Feel free to put up any photos. You might be able to get equivalent bearings from a bearing company but you’d also need new seals that protect them and if so that’s going to be virtually impossible.

You could try contacting the present Servis UK company and explain your reasons. There’s always a slight possibility there could be some really old spares languishing in a dark corner somewhere.

Thanks for the reply Andy, I've been doing some digging since my last post and I found a small company that are going to make me some bearings for the mangle and re-face all the shafts so the mangle is just about sorted, the agitator drive shaft problem might not be a problem at all, at the end of the day all I need is a rotary drive shaft seal and it looks like SKF do a seal that will do the job if I put two seals in and use the original spring, SKF part number CR6916. The internet is a truly marvellous thing imagine trying to do what has taken me just a few hours to sort out before we had the internet!

I have included a Wikins Servis AD, so you can see what the machine will look like when complete, the Model S mk15 is bottom right and as luck would have it, it's the same colours that I have chosen, have a look at the date at the top right, It could be that my machine is older than I thought the motor ID plate has got B.S 170, 1939 stamped on it, made by GE.

I hope to have the machine complete by early new year and will post pictures, It's been a learning experience from the day I purchased the machine and very good to know that the machine will be used and stay in the family long after I am gone, Cheers Andy and any one taking an interest in this post.

Hi there Chris,

Just joined the forums after reading your post, I'm willing to bet that you managed to fix up that old servis. I have one myself which i am offering if you want one for spares? You can have it free if you cover transport costs.

Or you can pick up from Scotland.

Regards, Dave.