Solved
Hotpoint
BHWM129

Machine is stucking on first cycle. Hotpoint BHWM129.

YUyuureec
Asked over 7 years ago 4,072 views
0

Hi, I was trying to find similar problem at this forum but couldn't.

Around two weeks ago my washing machine has started stuck in first washing cycle. Machine fills and drains, doing 2-3 spins and again fills and so on. After playing with washing setting I found out that machine works fine if I choose to wash it without heating water. I thought that this is because of limescale on the heating element, but today I took of this element and it looks almost like new.

What else can cause this issue? Shall I try to replace heating element?

Would appreciate any help!

Thanks in advance.

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Hotpoint BHWM129 sticks on first wash cycle when heat is selected

The problem
The Hotpoint BHWM129 repeatedly fills, drains and does a few spins during the first wash cycle, then repeats. The machine completes cycles normally if washing is selected without water heating. The heating element was removed and was reported to look almost like new.
Likely cause
The accepted reply points to a faulty heating element, with diagnosis based on electrical continuity rather than its visual condition.
What fixed it
Test the heating element with a continuity test or multimeter. The discussion does not confirm any part replacement or final repair outcome.
Checks to try
  • Observed that the machine works normally on a no-heat wash setting
  • Heating element was removed and visually inspected
  • Accepted advice was to test the heating element for continuity with a multimeter
Parts or tools mentioned
  • Heating element
  • Multimeter

Safety: Avoid live electrical testing. Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 5 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 7 years ago

Hello. You need to test the heating element with a continuity test or multimeter. More information can be found here - Washing machine not heating up water

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your Hotpoint.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your Hotpoint needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice