Hotpoint WMFUG942 Door Issue
I'm looking for help with the door on my machine. The latch broke so I replaced the handle. Then the door wouldn't latch to a replaced the interlock
The door still will not latc correctly. Washing machine will not start due to this. No error code. Machine clicks 3 times attempting to lock but is then unsuccessful.
Is there anything else I should be checking or is it time for a new machine?
Thanks in advance
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Hotpoint WMFUG942 door will not latch after handle and interlock replacement
- The problem
- On a Hotpoint WMFUG942 washing machine, the door latch had broken. After replacing the door handle and then the interlock, the door still would not latch correctly. The machine clicked three times trying to lock, then failed to start. No error code was reported.
- Likely cause
- The accepted reply suggests the door latch/handle spring was not fitted correctly, leaving the latch loose and preventing proper engagement with the interlock.
- What fixed it
- Check the door latch spring fitting and ensure the latch is not loose or floppy. The thread was marked solved, but no final confirmation was posted to state the exact repair carried out or that the machine was definitely fixed.
- Checks to try
- Observed three lock attempts/clicks before failure
- No error code reported
- Door handle replaced
- Interlock replaced
- Check whether the latch spring is fitted correctly and the latch is not loose
- Parts or tools mentioned
- Door handle
- Interlock
- Latch spring
Safety: Disconnect the appliance from the electricity supply before any inspection. Work involving mains electrics, gas or sealed refrigeration systems should only be carried out by a suitably qualified appliance engineer.
1 Answer
Hi. The latch needs the spring fitted correctly so it is not loose and floppy?
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
hotpoint wmxtf 842 - Door Interlock screws
1 answer • 1 reply
Hotpoint door won't lock
1 answer • 3 replies
Hotpoint washing machine door interlock
1 answer • 4 replies
Hotpoint WDPG 9640 - Torx screws on door
1 answer • 2 replies
Hotpoint Aquarius WMA40 door fault
1 answer • 1 reply
Hotpoint BWD129 door light flashing with no error lights
1 answer • 1 reply
Hotpoint BWD129 door locked light flashing
1 answer • 5 replies
Hotpoint Hvl 241 (Uk) - 2 And 4 Lights On - Suspect Pump Blockage
1 answer • 1 reply
"door" Fault Code On Hotpoint Wt721
1 answer • 1 reply
Hotpoint Wt741 - Door Error Following Capacitor Replacement
1 answer • 1 reply