Beko WME7267W leaking soapy water back through the soap drawer????

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko WME7267W leaking soapy water from dispenser, likely restricted drain

The problem

An 8.5-year-old Beko WME7267W was reported to leak soapy water back through the soap drawer during spin. The machine had already had the pump and level sensor changed, but the fault remained. It also occasionally appeared to jump back to an earlier point in the programme. The original poster later added that it mainly happened on the first load after the machine had been unused for a few days, and then seemed to work normally.

Likely cause

The accepted diagnosis was a partial blockage in the drain path, causing water not to pump away properly. A forum reply specifically suggested checking the pump filter, drain hose end, and any sink/U-bend spigot connection for obstruction. The exact blocked point was not confirmed.

What fixed it

Recommended action was to inspect the drainage system for a partial blockage, particularly the pump filter and the drain hose connection/spigot. Although the thread was marked solved, no completed repair or confirmed root cause was posted by the original poster.

Checks to try

• Pump filter
• Drain hose end
• Plastic spigot/U-bend connection for obstruction