Solved

Help I've lost my emergency drain

AMAmie
Asked over 7 years ago 3,172 views
0

Hi when cleaning my beko wtg841b1w, i pushed the emergency drain hose to far and it fell through the hole and into the machine is there any way i can get it back out?!

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Emergency drain hose pushed back inside Beko WTG841B1W

The problem
On a Beko WTG841B1W washing machine, the small emergency drain hose was pushed too far during cleaning and fell back through the access hole into the machine.
Likely cause
The emergency drain hose had slipped back behind the lower access area after being pushed in too far.
What fixed it
The accepted advice was to remove or gently prise off the lower plastic kick-plate to access the pump filter area, where the small drain hose should normally be found and retrieved. The thread was marked solved, but the user did not post a final confirmation of the exact result.
Checks to try
  • Removed or gently prised away the lower plastic kick-plate
  • Checked the pump filter area for the small emergency drain hose
Cause identifiedGenerated 18 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 7 years ago

Try removing the plastic kick-plate at the bottom of the machine, they often just gently prize away revealing the pump filter where the small draining hose should be.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.