Indesit Drum Cracked
Hello there!
I own a IWME 27 washing machine by Indesit. I have the S/N if necessary.
Attached pictures of the problem + video:
Issues started appearing when the machine was loaded with probably too many bedsheets. I wonder if the cracking was caused by this.
Thank you
sk
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Indesit IWME 27 outer drum cracked and leaking
- The problem
- An Indesit IWME 27 washing machine developed cracking and leaking around the drum area after a load of bedsheets. The damage shown was described as the back of the outer drum being cut into.
- Likely cause
- The accepted diagnosis was severe mechanical damage to the outer drum. The forum explanation was that this is typically caused either by an object getting inside and being dragged around the back of the drum, or by excessive play from worn or faulty drum bearings and/or drum wear allowing the inner drum to cut into the outer drum. The exact cause was not confirmed.
- What fixed it
- A temporary repair was attempted with Plastic Aid, which reduced the main leak, but multiple small leaks remained. The machine was considered beyond economical repair and was written off. The owner replaced it with a Bosch washing machine.
- Checks to try
- Visual evidence of cracking and leaking was provided by pictures and a video
- Forum diagnosis noted possible excessive drum and/or bearing play
- Forum diagnosis noted the possibility of an object trapped inside the drum area
- Parts or tools mentioned
- Plastic Aid
- Bosch washing machine
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
2 Answers
Hi. I would say that's a write-off. It can only be caused if either something gets inside and gets dragged around the back of the drum cutting into the back of the outer drum, or when the drum and/or bearings have excessive play due to wear or a fault, and allow the back of the revolving inner drum to cut into it.
Need Professional Help or Spare Parts?
Thank you Andy
While the Plastic Aid was able to solve the main leak, there were so many little ones that it made to write-it-off. I bought a Bosch washing machine, it'll arrive in the next couple of days.
I was very pleased to find out about PlasticAid - great tool! take care
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Hotpoint F7 E2 Fault
1 answer • 1 reply
My Bosch washing machine is stuck on 33 minutes remaining
1 answer • 1 reply
Bosch washing machine door lock accidentally triggered with the door open – how I reset it
0 answers • 2 replies
Cant identify the correct replacement carbon brushea
0 answers • 2 replies
LG washing machine making intermittent noise — video link included
1 answer • 4 replies
Washing machine beeps then shuts down
1 answer • 1 reply
Candy washing machine below slip
1 answer • 1 reply
No longer starts.
1 answer • 3 replies
Mould keeps building up in my washing machine tray
1 answer • 1 reply
AEG Loud Knocking on Spin
0 answers • 1 reply

