Wdm130 Washer Dryer Dryer. Clothes Coming Out Hot And Steamy
In the last few days my washer dryer has been less effective in drying. The dryer is getting up some heat but producing steaming, not dry, clothes. I'm guessing that wherever the steam escapes is blocked and my clothes are getting a nice sauna.
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
WDM130 washer dryer dries poorly with hot, steamy clothes
- The problem
- The WDM130 washer dryer was heating during the drying cycle, but clothes were coming out hot, steamy and still damp rather than dry.
- Likely cause
- The accepted diagnosis was that the condenser drying system was not receiving the required cold water trickle, so steam was not being condensed. A blockage in the condenser chamber was also mentioned as a possible cause.
- What fixed it
- Check that cold water is running into the condenser chamber during tumble drying. The accepted reply said there may be a rubber hose at the top centre rear with a plastic cap; removing the cap allows you to see whether there is a steady trickle of water into the plastic condensing chamber. If water is not entering, or if the condenser chamber is blocked, further diagnosis should be carried out by a suitably qualified appliance engineer.
- Checks to try
- Verified the machine was producing some heat but not drying clothes
- Check for a steady trickle of cold water into the plastic condensing chamber during tumble drying
- Check for possible blockages in the condenser chamber
- Parts or tools mentioned
- Rubber hose at the top centre rear
- Plastic cap
- Plastic condensing chamber
1 Answer
On a condenser washer dryer such as yours, the steam is blown by a fan into the plastic condenser chamber at the back of the tub. The steam then hits a steady trickle of cold water that should be running in there. If the cold water isn't running into it then the clothes will get hot but never dry. Make sure the cold water is running in.
There may be a rubber hose right at the top centre of the machine at the back with a plastic cap over it. Removing this cap should show where the water runs into the plastic condensing chamber and there should be a steady trickle when the washer dryer is tumble drying.
If you have got blockages in the condenser chamber then maybe it could interfere with the drying.
I gave a little more detail in a previous question on this subject here - washer dryer problem, clothes come out hot and damp
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Hotpoint Washer Dryer NDD 9636 DA UK venting steam
1 answer • 2 replies
Beko WDJ723023W washer dryer - Dryer not heating
1 answer • 2 replies
Miele washer dryer WT2780 top cover getting v hot on drying cycle
1 answer • 3 replies
If you tumble dry everything do you still need a hot wash?
1 answer • 3 replies
Bosch washer dryer not heating on drying cycle
1 answer • 3 replies
Hotpoint washer dryer blowing elements
1 answer • 2 replies
Hotpoint washer/dryer entire screen flashing on/off. (video included)
1 answer • 4 replies
Beko Washer Dryer not heating
1 answer • 2 replies
Hotpoint Aquarius 8640 Washer/Dryer - clanking - knocking drum
1 answer • 1 reply
Beko washer dryer not heating WDX8543130B
1 answer • 1 reply
