Bosch Logixx 8 Fault 43 Help
Hi, any advise appreciated.
Our Bosch washer got through most of the cycle, but stopped short of the spin cycle I think, as clothes inside were very wet still - and very heavy load. Apparently there was a fault code F43 on the display (according to wife), but now there is no display message. The control dial lights up, but only the first machine cycle (to left or right direction) and then this is only the temperature and spin speed indicators and nothing else will work. If the dial is moved to different wash cycles nothing changes.
Any ideas on how to test further or what this could indicate?
Thanks
Dom
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Bosch Logixx 8 showing F43 and not progressing through programmes
- The problem
- The washer completed most of a cycle but stopped before the spin stage, leaving the clothes very wet and heavy. An F43 fault code was reportedly displayed. Afterwards the display no longer showed the code; the control dial lit only the first programme position and only the temperature and spin speed indicators responded, with other programme selections not changing anything.
- Likely cause
- The accepted reply states that Bosch Logixx F43 indicates a motor fault. The exact cause within the motor circuit was not identified in the discussion.
- What fixed it
- The thread only provides the diagnosis that F43 points to a motor fault. No further test procedure or confirmed repair is documented. Further diagnosis should be carried out by a suitably qualified appliance engineer.
- Checks to try
- Reported F43 fault code on display
- Observed cycle stopping before spin with laundry left very wet
- Checked programme dial behaviour and indicator response after the fault
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
1 Answer
According to my sources a Bosch Logix with error code F43 has " a motor fault". This is a prime example of how useless many error codes can be, especially to the public. It could be several different things but it presumably thinks the motor has a fault, with no indication of how serious.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
My Bosch washing machine is stuck on 33 minutes remaining
1 answer • 1 reply
Bosch washing machine door lock accidentally triggered with the door open – how I reset it
0 answers • 2 replies
Bosch idos wiring harness
1 answer • 2 replies
Key symbol and circular symbol with small and large water droplets on Bosch Series 6 Anti-Stain washing machine
1 answer • 3 replies
Bosch Avantixx Washing Machine Not Draining
1 answer • 4 replies
How does one remove front panel to gain access to the drain pump of a Bosch VarioPerfect Serie | 4 model WAN24001GB/19 ?
1 answer • 15 replies
BOSCH WDU28560GB fan running??
1 answer • 1 reply
Bosch I DOS system any good?
1 answer • 2 replies
Bosch washer drum not rotating
1 answer • 1 reply
WAU28T51GB/01 won't drain
1 answer • 23 replies