Bosch Logixx7 Intergrated Machine - No Spin

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Bosch Logixx7 integrated washing machine not spinning laundry dry

The problem

A newly purchased Bosch Logixx7 integrated washing machine consistently failed to spin laundry dry. The user reported trying multiple programmes and load sizes, from full loads to under 1 kg, but washing still came out soaking wet. A visiting engineer reportedly stated there was no fault, and customer service suggested it needed a full load to spin.

Likely cause

The accepted reply said that if out-of-balance detection were the cause it should only happen occasionally. Because the problem was reported on every load, the strongest supported diagnosis is that the machine likely had a fault or was unfit for purpose. A pump fault was suggested by another member, but this was not confirmed.

What fixed it

The accepted advice was that constant failure to spin is not normal and points to a fault rather than normal load balancing behaviour. No specific repair was documented in the discussion. The practical recommendation implied by the thread is to pursue the fault with the supplier/manufacturer rather than accept the explanation that only full loads will spin.

Checks to try

• Tried various programmes
• Tried different load sizes from full to less than 1 kg
• Engineer visit reportedly found no fault