Solved
Indesit

Indesit Iwdc6125S Lights Flashing Problem

MOmotonit77
Asked almost 14 years ago 915 views
0

Hi,

I have washer and dryer Indesit IWDC 6125S.

Today I did one washing which went well then put another one on and after about 5min washer make some little noises and stop working and all lights start flashing.

I did unplug few times, clean the filter and plug again and now there is no more flashing but when I set the program doesnt run, when I press Intensive wash or eco time button on that one light is flashing twice and stop.

I did try put drain cycle but doen't run.

I just checked now and all lights are flashing again.

Any sugestions?

Regards

Sylwester

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Indesit IWDC 6125S stops and all lights flash

The problem
Indesit IWDC 6125S washer-dryer completed one wash, then on the next cycle stopped after about five minutes with slight noises and all lights flashing. After being unplugged and the filter cleaned, the flashing temporarily changed, but the machine still would not start any programme, including drain.
Likely cause
The discussion indicates a non-specific fault condition. On these Indesit/Hotpoint models, all lights flashing can occur without a clear error code, and the exact cause was not identified from the symptoms given.
What fixed it
No confirmed DIY repair was provided. The accepted advice was to have the appliance inspected by an engineer because several different faults could cause this behaviour and some are not suitable to diagnose as a DIY repair.
Checks to try
  • Machine unplugged and retried
  • Filter cleaned
  • Drain cycle attempted

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Professional repair recommendedGenerated 20 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 14 years ago

Indesit and Hotpoint, which are made by the same company sometimes stop with all the lights flashing without displaying a proper error code as they should do. I would get an engineer to look at it as it could be different things some of which are impossible to check for a diy repair.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your Indesit.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your Indesit needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice