Solved
Beko

Beko Wme7247S Programs Stuck

JAjack1492
Asked about 12 years ago 8,056 views
0

I have a problem with a beko7247s. the top 3 programs work ie intensive,cotten & synthetics, all the rest just show a flashing fabric softner icon. any ideas how to clear this???

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko Wme7247S programmes stuck with flashing fabric softener indicator

The problem
On a Beko Wme7247S washing machine, the top three programmes (Intensive, Cotton and Synthetics) worked, but all other programmes stopped and showed a flashing fabric softener icon.
Likely cause
The accepted diagnosis was loss of cold water fill on a hot and cold fill machine. This would allow some cycles to fill using hot water but then stop when the programme reached rinse stages requiring cold water.
What fixed it
Check that the cold water supply is actually entering the machine. The thread does not confirm any further repair beyond this diagnosis.
Checks to try
  • Confirmed that Intensive, Cotton and Synthetics programmes worked
  • Observed flashing fabric softener icon on the other programmes
  • Advised to check whether cold water was entering the machine
Cause identifiedGenerated 8 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered about 12 years ago

If it's a hot and cold fill washing machine make sure the cold water is going into the machine otherwise it could fill (with hot) on some wash cycles but stick when it gets to rinses.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.