Beko Wmb81241Lb Reset
I have a beko wmb81241lb needs resetting ,it just fills up and turns around but wont spin etc or finish cycle,any advice much appreciated,it is showing error e08 when I press the start button to reset ,anybody know what that means regards lisa xx
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Beko WMB81241LB stops mid-cycle with E08 and will not reset
- The problem
- The Beko WMB81241LB fills with water and turns the drum, but will not spin or complete the wash cycle. When the start button is pressed to try a reset, it shows error code E08.
- Likely cause
- A stored fault is preventing a reset. The strongest suggestion in the discussion is a possible drain/pump-out problem if the machine is not emptying water, but the exact meaning of E08 was not confirmed in the thread.
- What fixed it
- The accepted advice was that the machine cannot be reset until the underlying fault is repaired. If it is not pumping out, that should be investigated as it may clear the fault. As the error code meaning was not identified in the discussion, further diagnosis should be carried out by a suitably qualified appliance engineer.
- Checks to try
- Observed that the machine fills and turns but does not spin or finish the cycle
- Error code E08 appears when pressing start to reset
- Check whether the machine is pumping the water out
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
1 Answer
If it is detecting an error it can't be re-set until the fault has been fixed. Unfortunately I don't have Beko error codes (despite having a book of error codes) so unless there are other clues it's impossible to know where to look. That's what I hate about error codes, they trap errors so no one can repair a machine unless they know what the code means and more and more manufacturers keep them as secret as possible.
If it isn't pumping the water out you could troubleshoot why, which might clear the error. Otherwise you'll need an engineer or the meaning of the error code.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Can this washer be repaired?
1 answer • 1 reply
Beko YT124PT44MW no programme will run
1 answer • 1 reply
Washing Machine Beko B5WT594189W drain hose dissappeared behind filter panel
1 answer • 1 reply
Installing cover A underneath Washing Machine (Beko B5W1241AW)
1 answer • 5 replies
Beko tripping power plastic stuck in motor SOLVED
1 answer • 1 reply
Factory reset not working
1 answer • 1 reply
Beko - Shaking too much?
1 answer • 1 reply
Beko with inverter motor clicks when washing with water
1 answer • 4 replies
Beko wdix8543100 Not drying clothes
1 answer • 3 replies
Beko WM5100 stops after wash- no rinse or spin/drain- but will rinse and spin/drain separately
1 answer • 12 replies