Hotpoint BHWD149
Just got this machine. So far I've just used wash setting no. 1 @ 40 degrees and the dryer is set not to come on. Twice now the dryer has come on automatically and the dryer light has also come on. Any ideas?
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Hotpoint BHWD149 dryer starts during wash with dryer set to off
- The problem
- On a Hotpoint BHWD149 washer-dryer, the dryer came on automatically during wash programme 1 at 40°C even though the dryer was set not to come on. The dryer light also illuminated. This happened twice.
- Likely cause
- Most strongly supported diagnosis was a fault with the dryer timer/control, either stuck contacts inside the dryer timer or the control knob being out of alignment so that the off position was not actually off. The exact cause was not confirmed.
- What fixed it
- Suggested diagnosis was to observe how long the dryer stays on, test the machine with no laundry in the drum, and if it runs until switching itself off, check whether the timer knob then points to an off position. No completed repair was documented, so the exact fix was not confirmed.
- Checks to try
- Observed that the dryer came on automatically twice during wash programme 1 at 40°C
- Dryer light illuminated when the fault occurred
- Suggested to note how long the dryer stays on when it activates
- Suggested to test with no laundry in the drum
- Suggested to let it run until it turns off and then check whether the timer knob points to an off position
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
1 Answer
Possibly there are contacts stuck inside the dryer timer. When the dryer comes on how long does it stay on for? You could test for this with no laundry in the drum. Alternatively, is the control know somehow out of line so that when it is turned off it's not actually off. If that was the case you should let it run until it turns off itself and check that the timer knob is pointing to an off position.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Hotpoint BI WMHG 81484 UK
1 answer • 2 replies
Hotpoint WMFUG942 Door Issue
1 answer • 1 reply
Knocking sound in vintage Hotpoint First Editions 1000 - suggestions please!
1 answer • 3 replies
hotpoint wmxtf 842 - Door Interlock screws
1 answer • 1 reply
Hotpoint WM51 motor armature query
1 answer • 3 replies
Hotpoint selling split tubs again?
1 answer • 7 replies
Hotpoint WD21 "Starter Edition" question
1 answer • 5 replies
Hotpoint rd966j screen not working
1 answer • 3 replies
Hotpoint Washing Machine spins but rubs
1 answer • 4 replies
Bleep from Hotpoint Washing machine
1 answer • 1 reply
