Beko WMX D847 digital display
Digital display on my Beko WMX D847 Washer has stopped working, machine working perfectly but for this. Only prob I have is changing temp & spin with no display. No instruction manual, can't download one as the model no is not where it should be. Any advice would be appreciated.
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Beko WMX D847 display not working although washer still runs
- The problem
- The digital display on a Beko WMX D847 washing machine had stopped working, but the machine was otherwise operating normally. The main inconvenience reported was being unable to see or change temperature and spin settings easily.
- Likely cause
- Most strongly supported diagnosis is a connection problem to the display, or a fault on the control panel, LCD, or main PCB. The exact failed component was not confirmed.
- What fixed it
- The accepted advice was to remove and check the display/control connectors for connection issues. If no obvious connection fault is found, further diagnosis should be carried out by a suitably qualified appliance engineer, as the fault may be on the control panel, LCD, or main PCB.
- Checks to try
- Check the connectors for connection issues
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
1 Answer
Apart from removing the connectors and checking for connection issues it's probably best to get an engineer. It could be a fault on the control panel or the LCD or even potentially a fault on the main pcb.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Can this washer be repaired?
1 answer • 1 reply
Beko YT124PT44MW no programme will run
1 answer • 1 reply
Washing Machine Beko B5WT594189W drain hose dissappeared behind filter panel
1 answer • 1 reply
Installing cover A underneath Washing Machine (Beko B5W1241AW)
1 answer • 5 replies
Beko tripping power plastic stuck in motor SOLVED
1 answer • 1 reply
Factory reset not working
1 answer • 1 reply
Beko - Shaking too much?
1 answer • 1 reply
Beko with inverter motor clicks when washing with water
1 answer • 4 replies
Beko wdix8543100 Not drying clothes
1 answer • 3 replies
Beko WM5100 stops after wash- no rinse or spin/drain- but will rinse and spin/drain separately
1 answer • 12 replies