Beko WTV 6602 CS BO E09 error

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko WTV 6602 CS BO showing E09 and multiple random fault codes

The problem

The washing machine displayed E09, described by the owner as a door lock fault. The door lock was replaced but the E09 fault remained. In service mode, multiple different fault codes were also reported, suggesting the fault was not limited to the door lock itself.

Likely cause

The accepted reply suggests the most likely issue is not the front control panel alone but an underlying electrical fault such as a wiring/connection problem, a possible earth fault, or a fault on the main PCB. The exact cause was not confirmed.

What fixed it

Do not replace the whole front control panel as a guess. The accepted advice was that, because the machine is showing various error codes, parts should not be guessed at. Further diagnosis should be carried out by a suitably qualified appliance engineer.

Checks to try

• Door lock replaced
• Service programme showed multiple fault codes

Parts or tools mentioned

• Door lock