Miele W1 WSG663 Display and tumbling faults
Today I had two different issues - unsure if they're connected but massive coincidence. First was turning the machine off - the display wouldn't turn off... and secondly it started to tumble during a wash and it wouldn't tumble - just did some weird vibrating tumble.
any idea? It's still under warranty so will get them out but thought i'd ask here too!
IMG_1417.mov
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Miele WSG663 display staying on and abnormal tumbling traced to control module fault
- The problem
- On a Miele W1 WSG663 washing machine, the display would not turn off when the machine was switched off. During a wash it also failed to tumble normally and only made an unusual vibrating movement.
- Likely cause
- A fault with the power unit and programme module was confirmed by the manufacturer's visit. A main PCB problem had also been suggested in the discussion before confirmation.
- What fixed it
- Miele attended under warranty and resolved the issue. The reported fault was identified as a power unit and programme module fault. The exact repair steps or replaced parts were not detailed.
- Checks to try
- Observed that the display would not turn off when the machine was turned off
- Observed that during wash the drum did not tumble properly and only made a vibrating-type movement
- Manufacturer service visit confirmed a power unit and programme module fault
- Parts or tools mentioned
- power unit
- programme module
- main PCB
2 Answers
Thanks for the update. Apologies, I thought I'd answered you. I was meant to say it looked like some problem with the main pcb
Need Professional Help or Spare Parts?
Miele have been and resolved. It was a power unit and program module fault.
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Miele W1 WSG663 Spring noise?
1 answer • 10 replies
Miele WT945 - no water going into drum
1 answer • 1 reply
Miele WWI660 water under machine.
1 answer • 1 reply
Miele WT945 discharges water into bottom of machine from lower condenser hose after final spin?
1 answer • 13 replies
Tension springs on Miele W2243
1 answer • 17 replies
Miele W5872 Fault F104 (low voltage to motor)
1 answer • 3 replies
Miele WKG120 Twindos leaking intake
1 answer • 1 reply
Miele WD2780 Fault 53
1 answer • 4 replies
Miele Prestige Plus washing machine: 'Check Inlet' light flashing.
1 answer • 5 replies
Miele Washing Machine (Spinning Noise)
1 answer • 4 replies