Solved
Electrolux

Ikea Renlig (Electrolux) Loose drive pulley

VGvgarmes
Asked over 3 years ago 7,773 views
0

I have an Ikea Renlig machine (made by Electrolux I believe) from 2015. The belt started to come off so I replaced it by a new one but that didn't help. In the end I found out that the reason is a loose drive pulley. The drive pulley wobbles which makes the belt come of affter a couple of spins. It has also a bit of play in it when turning it in alternating directions.

I can't figure out what part is causing this. The shaft seems to be a bit dented right where the metal plate in the drive pulley is attached, but in a way that I'm not sure if it's just how it's manufactured. See some pictures below.

Any advice would be really appreciated.

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Ikea Renlig belt coming off due to wobbling drum pulley

The problem
The washing machine belt was coming off after a few spins. Replacing the belt did not cure it. The user found the drive/drum pulley was loose, wobbled, and had some play when turned back and forth.
Likely cause
The accepted solution states the drum pulley itself is worn.
What fixed it
Replace the drum pulley.
Checks to try
  • Belt was replaced but the fault remained
  • Drive/drum pulley was found loose and wobbling
  • Pulley had some play when turned in alternating directions
Parts or tools mentioned
  • Drum pulley
Cause identifiedGenerated 15 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 3 years ago

Hello there. You just need to replace the drum pulley. It is the drum pulley itself that is worn.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.