Door Leaks
My integrated undershelf washing machine has been leaking. I suspected from the main door. I removed the large wooden panel on the front that's part of the kitchen facia to expose the raw machine and a thin plane of metal that is the actual door. I did this to confirm more clearly where the dribble was coming from but now that the heavy door is off the dribbling has stopped.
Is the door to heavy and has been deforming the seal or is the seal just old and a new one will withstand the weight of the door?
Thanks for any advice...
Miele W2809
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Miele W2809 door-area leak likely from door seal contamination
- The problem
- An integrated Miele W2809 washing machine was dribbling water, suspected from the main door area. After the outer wooden kitchen fascia door was removed, the dribbling stopped.
- Likely cause
- The accepted reply supported an issue with the door seal sealing surface rather than confirmed door weight distortion. Dirt or debris such as undissolved detergent, hairs or cotton strands between the door glass and the seal was suggested as the most likely cause. An old or damaged seal was not confirmed.
- What fixed it
- Clean the door seal and the rear face of the door glass where it presses against the seal, and check that the seal is free from debris before considering seal replacement. The discussion did not confirm that the seal needed replacing.
- Checks to try
- Observed leak from the door area
- Leak stopped after removing the heavy wooden fascia door
- Check the door seal is clean
- Check for undissolved detergent, hairs or cotton on the seal
- Clean the back of the door glass where it contacts the seal
1 Answer
I would guess the latter. Make sure the seal is clean and free from bits of undissolved detergent, hairs, strands of cotton etc. and also clean the door glass at the back where it presses against the door seal before thinking of replacing it as anything getting between the back of the door glass and the seal can make a good door seal leak..
5 tips for finding a washing machine leak
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Beko Wmc62W Leaks From The Door Only During The Wash?
1 answer • 1 reply
Washing Machine Leaking Down Concrete Block
1 answer • 3 replies
Water Leaking From Door
1 answer • 3 replies
Hotpoint WMFUG942 Door Issue
1 answer • 1 reply
Front Load Washer Rubber Door Seal Not Aligned? Whirlpool WFW560CHW
1 answer • 1 reply
Miele WKG120 Twindos leaking intake
1 answer • 1 reply
Spill/leak
1 answer • 4 replies
hotpoint wmxtf 842 - Door Interlock screws
1 answer • 1 reply
Door seal holding water
1 answer • 7 replies
Intermittent leaking
1 answer • 3 replies
