Indesit Iwdc6105 - Filled With Cold Water After Wash Cycle
After the last wash, machine has filled up with cold water - but not above the bottom of the door - and now won't drain.
There isn't an LED display so there's no error message.
When I want to start a cycle, the 'door locked' light flashes red repeatedly (not in a pattern ie. 7 times).
I've read some of your forum and I think I need to take out the cold water lead (from top right-hand corner of back of machine) and make sure it's not blocked, should I do this?
Please help, I know very little about this sort of thing.
1 Answer
I've already put all the advice I can think of do deal with a washing machine not emptying the water (including how to drain it). I would drain out the water using the advice in my article.
If by any chance the washer has filled up with water without being on a programme there are a couple of explanations here - Washing machine fills with water overnight or when switched off
If the article and all the other relevant ones it links to don't help I would suggest getting an engineer.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Indesit XWA 71451WUK washer won't stop Filling
1 answer • 1 reply
Indesit Iwde126 Overheating
1 answer • 3 replies
Indesit Wb111 Not Filling The Drum
0 answers • 1 reply
Indesit Wil 82 Overheated
1 answer • 9 replies
Indesit Witl-105 Fills With Water Then Shuts Down Mid-Cycle
1 answer • 1 reply
Indesit Widl 126 No Heat On Drying Cycle
1 answer • 1 reply
Samsung Ecobubble - cold water filling up drum on drying cycle
1 answer • 20 replies
Hot fill top loader
1 answer • 1 reply
Which is more economical - hot and cold fill or cold fill?
1 answer • 1 reply
Hotpoint WDUD 9640 tripped fuse box during drying cycle. Filled machine with water and gave F15 error code.
1 answer • 19 replies