Beko Flashing Lights Fault

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko washing machine flashing first three lights after being moved

The problem

A Beko washing machine, around 3½ years old, developed a fault immediately after being moved slightly. The first three lights were flashing. The owner had seen this described elsewhere as an electronic card failure and wanted to know whether it was worth repairing.

Likely cause

The strongest diagnosis in the discussion is that the fault may be related to something disturbed during moving, particularly the water supply, tap position or mains supply/socket, rather than a confirmed failed electronic card. A pressure or supply issue was suggested, but no exact fault was confirmed.

What fixed it

Recommended checks were to make sure the water taps and supply were OK and to make sure the socket was sound and providing full power. The accepted advice was not to buy an electronic control board speculatively because it is expensive and may not cure the fault. The exact repair was not confirmed.

Checks to try

• Check the taps are on and the water supply is OK
• Check the socket is good and supplying full power