Solved
Beko

Beko Washing Machine Trips Rcd

GEGemmabryan10
Asked over 14 years ago 5,811 views
0

Recently The lights on the front of my Beko washing machine have not been coming on. the washine machine still worked perfectly well untill recently every time i turn the washing machine on the RCD trips. Its not the plug or the socket we have checkedd all this. Just wondered if anyone had any idea what the problem could be as my husband can fix machines but if its going to be too expensive we will buy another one. Thanks.

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko washing machine trips the RCD and front panel lights had stopped working

The problem
A Beko washing machine previously continued to wash despite the front lights not coming on, but it later began tripping the RCD whenever it was switched on. The plug and socket were reportedly checked and ruled out.
Likely cause
The accepted reply suggests a probable wiring fault, such as a wire rubbed bare, causing control panel connection issues and now creating a short to earth or insulation fault. This was suggested as a likely diagnosis, not a confirmed repair.
What fixed it
No confirmed repair was documented. The recommended action was to trace the fault with an insulation test meter, as this type of earth-tripping fault needs proper insulation testing. Further diagnosis should be carried out by a suitably qualified appliance engineer.
Checks to try
  • Plug checked
  • Socket checked
Parts or tools mentioned
  • Insulation test meter

Safety: Because the machine is tripping the RCD, it may have an earth or insulation fault. Further diagnosis should be carried out by a suitably qualified appliance engineer.

Cause identifiedGenerated 14 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered over 14 years ago

Could be a wire that's got rubbed bare somewhere causing connection problems with the control panel and now shorting out but other than that you need an insulation test meter to track down fusing or earth tripping faults on appliances.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.