Solved
LG

Can't Use Lg Wd-12331Ad Washer Dryer On Dryer Programme

BAbarryscarborough
Asked almost 14 years ago 4,091 views
0

Help please ?

I have just acquired from my daughter (who has just installed a built under washer/dryer in a newly re fitted kitchen) an approximately 1 year old LG WD-12331 AD washer dryer.

Having scoured the manual, it appears the dryer only works on the synthetic and cotton wash cycles. This is not a problem, but what seems to be a serious omission is the ability to use the dryer, without going through an entire wash cycle. Several times, because I have wanted to dry clothes a bit more than on an automatic programme, I have ended up going through an entire wash cycle a second time - really annoying and time consuming also, not at all enviromentally friendly!

Does anyone know of a workaround to the above please?

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

LG WD-12331AD appears not to support stand-alone drying

The problem
The owner of an LG WD-12331 AD washer dryer could only activate the dryer when the main selector was set to Cotton or Synthetic wash programmes. They wanted to dry items further without running another full wash cycle, but found no obvious dry-only setting on the rotary dial.
Likely cause
The discussion suggests this model may be designed so the drying function is only available as part of certain wash programmes, rather than as a separate dryer-only programme. This was not definitively confirmed by the manufacturer, but it was the strongest diagnosis in the thread.
What fixed it
No workaround or repair was confirmed. The accepted reply suggested checking for a separate dry setting or using the dryer controls after a spin cycle, but the owner reported there was no dry-only position on the main dial and the Dryer button only became active when Cotton or Synthetic was selected. The thread therefore points to a design limitation rather than a fault.
Checks to try
  • Instruction manual checked
  • Verified there was no drying-only position on the main rotary dial
  • Tested the Dryer button with and without the main power on
  • Tried the Dryer button on every rotary dial position
  • Confirmed the Dryer button only worked when Cotton or Synthetic was selected
Cause identifiedGenerated 5 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

3 Answers

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 14 years ago

Does the instruction book say you can't use the dryer separately? Normally you can use the dryer by setting the main selector dial to dry (or even the off position after a main spin cycle) and setting a time on the dryer controls -or if it's got digital controls there's normally still a setting for drying.

Whitegoods Help — appliance repair expert and forum host.
0
BA
barryscarborough
Answered almost 14 years ago

Hi Andy and thanks for your post,

The instruction manual does not state that the dryer cannot be used alone, however there is no position on the main rotary dial for drying only.

There is a separate 'Dryer' switch which when pressed repeatedly, cycles through various different drying times/temperatures however, this Dryer button is only active if the Synthetic or Cotton wash programmes have been chosen on the main rotary dial first, hence going through the complete wash cycle again.

Have tried using Dryer button only with or without main power switch on, also tried it on every position of rotary dial, however, still believe I must be missing something cos I simply cannot believe it is not possible to use the dryer only!

0
WH
WhitegoodshelpVerified Engineer
Answered almost 14 years ago

It sounds like it may well be designed to only work after a wash programme. Older washer dryers used to allow the dryer to work independently after any programme had finished. I'm thinking of the old Hoover washer dryers with mechanical controls. As soon as the wash programmer finished it went onto a dot on the dial and this position supplied power to the dryer's timer, which if set to a time automatically started the dryer.

These days the programme controls are more sophisticated and few use mechanical timers. If you could use the dryer separately I would think it should be mentioned in the instruction book.

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.

NAC Repair

Need an engineer?

NAC Repair

Rather leave it to a pro? Book a fully qualified engineer to diagnose and repair your LG.

  • Vetted, fully qualified engineers
  • Nationwide UK coverage
  • Fast, fixed-price appointments
Spares4Appliances

Need a spare part?

Spares4Appliances

Fix it yourself for less. Get genuine replacement parts for your LG delivered to your door.

  • Genuine, manufacturer-approved parts
  • Fast next-day UK delivery
  • Secure checkout & easy returns