Washing Machine Repair Forum

Front and top loaders that won't spin, drain, fill or finish a cycle — plus error codes, bearings and pumps.

Got a washing machine fault?

Describe your problem and get free help from UK engineers and experienced DIYers — most questions get a reply within hours.

Recent Questions

Solved
Washing Machines
Hotpoint

Hotpoint spin cycle no longer working.

I have a Hotpoint washing machine. The drum spins perfectly during the wash, but when it comes to the spin cycle it doesn't work. It drains perfectly well, too. I usually have t...

HEhedgehog90•over 7 years ago
Solved
Washing Machines
LG

LG WM1832CW washer water floods out from the bottom of the washer

My LG WM1832CW washer is probably already over 10 years old. But I have been having a persistent problem for years. I cannot use the Delicates or Hand wash cycles, as whenever I...

SASandy•over 7 years ago
Solved
Washing Machines
Bosch

Bosch Classixx 6 Banging noises

Bosch Classixx 6 machine making banging noises but only on spin cycle at certain speeds. see video at: https://youtu.be/nBp3AMa9pkk I would like to know if anyone thinks it's th...

CHchris_dixon•over 7 years ago
Solved
Washing Machines
Beko

Beko WME7267W leaking soapy water back through the soap drawer????

I have a 8.5 year old Beko that has started leaking soapy water back up through the soap drawer when spinning. I have changed the pump and the level sensor but it still happens....

FIFiFi•over 7 years ago
Solved
Washing Machines
Hoover

Diagnose pressure switch 41035075 Hoover VTS 612 D21

Hi All! I can't find any relevant help, for this question, in any of the available recources on the site. They have been very useful up to this point though. I now have replacem...

MImickyjc1•over 7 years ago

Can't find your fault?

Ask about your washing machine and get a tailored answer from our community.

Solved
Washing Machines

Not starting Cycle

Hi Chaps, Am new to the forum, I was wondering if you could give me some points on why my Beko WMB61431s won’t start. The display shows the time but does not start, I had a simi...

DADavid1971•over 7 years ago
Solved
Washing Machines

Simple Question

Hi, I've never had a washing machine before and I'm about to get a new one delivered and I just have one question that no one on the internet seems to be answering....I understa...

WAwashinator•over 7 years ago
AI answer
Washing Machines

Waste pipe won't drain water

Hello, I have brought a new washing machine for my new build house. I have installed it but it's not draining. I believe I have located the problem to the connection under my si...

JAJamesR•over 7 years ago
Solved
Washing Machines
Indesit

Indesit F13 error - Burnt fan

Hello all. I'm struggling to repair my Indesit IWDD 6105 B ECO UK model washer dryer which displayed F13 error code last time it ran. Since first spotting the error, I have trie...

ABabhi•over 7 years ago
AI answer
Washing Machines

Heating element screw taken out now cannot get it back on the heating element

Hello. I attempted to repair my hotpoont WMD 962 washing machine as there appeared to be something stuck under the drum so attempted to remove the heating element. I took the re...

RARaja•over 7 years ago

Can't find your fault?

Ask about your washing machine and get a tailored answer from our community.

Solved
Washing Machines

Hot water supply for hot and cold fill machines

Hello I bought this whirlpool machine a couple of weeks ago: 3LWTW4705FW It’s hot and cold supply. The appliance specialist who sold me it told me to arrange a hot supply. I did...

WIWillow19•over 7 years ago
Solved
Washing Machines

Noisy Washing machine when loaded

My washing machine is 9 months old, since new it has been very noisey on a spin, this seems to be the drum moving excessively. I have had repair man out and they have replaced t...

VIvickij_24•over 7 years ago
Solved
Washing Machines
Indesit

Indesit washer control board question

Hi, sorry for the long backstory, thought it would be best to add the full information. I have an Indesit xwd71452 xkuk My other half recently overfilled our washer and a sock m...

CHChris England•over 7 years ago
Solved
Washing Machines
AEG

AEG Lavamat Protex Plus display hardly visible!

Hi All, The display on my AEG lavamat protex plus AEG L98699FLE2 washing machine is hardly visible. It's not completely blank, rather it's really faint and not in a homogenous w...

DOdok•over 7 years ago
Solved
Washing Machines
Hotpoint

Hotpoint WF561P Washing machine refuses to spin up to speed

We have a Hotpoint WF561P Washing machine. It completes a wash cycle normally then refuses to spin up to speed. I have: Checked the pump for blockages - the pump discharges norm...

BABargeman•over 7 years ago

Can't find your fault?

Ask about your washing machine and get a tailored answer from our community.

Solved
Washing Machines
Samsung

My Samsung Washing Machine Shakes instead of spinning

I have contacted Samsung help center which they sent a technician who charged me 40 usd just to check and later took to the shop and told me PCB and Wiring harness needs replaci...

JAJayChi•over 7 years ago
Solved
Washing Machines

Error Code E03

We keep getting an E03 code, and we have checked for blockages in the filter, drain pump and drainage pipe. If the washing machine isn't used for a few days, it works perfectly...

JUJune333•over 7 years ago
Solved
Washing Machines

Washer tripping

I have a Beko washing machine and it's about 9 years old. Just recently the pause/cancel button has been very hit and miss as to whether it works or not, but other than than the...

COcool4cats•over 7 years ago
Solved
Washing Machines

Washing machine with 60 degree quick wash

I am looking for a domestic washing machine that does a 60 degree quick wash (60 minutes) but can’t find this information in the specifications on any of the appliance websites....

BEBennettRVN•over 7 years ago
Solved
Washing Machines
Hotpoint

Hotpoint washing machine dead BHWM129 (UK)/1

Hi I have a Hotpoint washing machine BHWM129 (UK)/1 and it is completely dead. The no any led indication on the front panel. I checked the wall socket and and it is ok. Please l...

GEgenesis•over 7 years ago

Top Contributors

Need an engineer?

Find an Engineer

Rather leave it to a pro? Find a local engineer to diagnose and repair your appliance.

  • Search by your postcode
  • See the checks each business has passed
  • Compare ratings and call-out charges

Need a spare part?

Spare Parts Guide

Fix it yourself for less. Work out which part your appliance needs before you order anything.

  • Match the symptom to the likely part
  • How to find your full model number
  • When a genuine part is the safer choice