Solved

Casey

CACasey d
Asked almost 7 years ago 3,363 views
0

Hi all, I have a beko wm74155lw washing machine and it keeps tripping the electrics. This has coincided with the door handle braking so i was wondering if this could be the cause for it tripping. Hope someone can help

Casey

Solution Summary

AI-generated from this discussion

This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.

Beko WM74155LW trips electrics; broken handle unlikely to be direct cause

The problem
A Beko WM74155LW washing machine was reported to be tripping the electrics. This happened around the same time as the door handle broke, and the question was whether the broken handle could be causing the electrical fault.
Likely cause
The accepted reply said a broken door handle would not normally cause an electrical fault. A possible explanation suggested was that the door interlock may have developed a fault that tripped the electrics and then jammed, which could have led to the handle breaking. This was presented as a possibility, not a confirmed diagnosis.
What fixed it
No confirmed repair was given. The accepted advice was that proper diagnosis of a washing machine tripping the electrics requires a special meter, so further diagnosis should be carried out by a suitably qualified appliance engineer.
Checks to try
  • Symptom noted: machine trips the electrics
  • Door handle was broken at the same time as the fault appeared
  • Accepted reply considered the door interlock as a possible cause
Parts or tools mentioned
  • Door interlock
  • Special meter

Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.

Professional repair recommendedGenerated 17 Aug 2026 · AI summaries can make mistakes — read the full thread below.
Was this summary helpful?

1 Answer

Accepted Answer
0
WH
WhitegoodshelpVerified Engineer
Answered almost 7 years ago

Hello Casey. I can't see a door handle breaking can cause an electrical fault on the washing machine. However, suppose it's possible that the door interlock could have caused the washing machine to fuse the electrics and the door interlock became jammed resulting in the door handle getting broken? At any rate you can't really troubleshoot a washing machine that is tripping the electrics without a special meter as described in my article here Washing machine is tripping or fusing the electrics

Whitegoods Help — appliance repair expert and forum host.

Your Answer

Sign in to share your expertise and post an answer.