WF80F5E0W4W machine stops at different stages
WF80F5E0W4W machine stops at different stages of wash, occasionally it will do full wash, other time it took almost 2 days!!! Any idea of the problem, could it be the PCB?
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Samsung WF80F5E0W4W stops at varying stages without an error code
- The problem
- The washing machine stops at different points in the cycle. It sometimes completes a full wash, but at other times the programme can take an extremely long time.
- Likely cause
- The accepted reply says one possible cause, seen on some machines without an error code, is an open-circuit heating element. However, the fault pattern could have several different causes and no single cause was confirmed.
- What fixed it
- No confirmed repair was documented. The accepted advice was that this type of intermittent stopping fault needs proper diagnosis rather than assuming the PCB is at fault. Further diagnosis should be carried out by a suitably qualified appliance engineer.
- Checks to try
- No error code was reported
- Programmes sometimes complete fully and sometimes stall for very long periods
Safety: Further diagnosis should be carried out by a suitably qualified appliance engineer.
1 Answer
These days it's rare for a washing machine fault not to trigger an error code and abort. There are anomalies, one of which with some washing machines if the heating element goes open circuit it can cause a washing machine to stick without causing an error. The nature if this fault is that it could be so many different things you would need an engineer to diagnose it.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Hisense washing machine not working
1 reply
No water in the drum after EF3 fault
4 replies
Hisense washing machine 001 code
6 replies
LG F1222TD PCB
5 replies
Bosch series 6 washer / drier stuck on 0.00 time and will not respond to any button
1 reply
Miele WEG365 WCS: drain fault and pump cavitation after transport - looking for W1/PowerWash expertise
2 replies
Water leaking from drain filter
1 reply
Water leaking from drawer of Meile washing machine
1 reply
Bosch washing machine only spins sometimes
2 replies
Hoover Wsahing Machine NOT filling with ENOUGH water
3 replies