I have just bought a Bosch WAQ28462GB and the 'instruction' leaflet is very vague! I'm not sure if I'm supposed to remove the four bolts at the back of this washing machine machine, before I install it? There are four plastic caplet type things that look like they may fit, if the bolts are removed? I'm pretty confused, and frustrated with the pathetic 'instructions'! If some kind soul, would point me in the right direction, I would greatly appreciate it. Kind regards, Louis.
Solution Summary
AI-generated from this discussion
This thread was marked as solved. Here's a summary of the problem and the fix, generated from the discussion below.
Bosch WAQ28462GB transit bolts need removing before use
- The problem
- The owner of a new Bosch WAQ28462GB was unsure whether the four bolts on the back should be removed before installation, and noted four plastic caps that appeared to fit in their place.
- Likely cause
- This was identified as normal transit packaging. The four rear bolts are used to secure the outer drum during transport to prevent damage.
- What fixed it
- Remove the transit packaging bolts before using the washing machine. The plastic caps are intended to fit into the holes after the bolts are removed.
- Checks to try
- Owner observed four bolts at the rear of the machine
- Owner observed four plastic caps that appeared to fit after bolt removal
- Parts or tools mentioned
- Four rear transit bolts
- Plastic caps
1 Answer
Hello, before using a new washing machine you need to remove the transit packaging. Most washing machines use 4 bolts to secure the outer drum in place and stop it banging around and damaging things during transit.
Need Professional Help or Spare Parts?
Your Answer
Sign in to share your expertise and post an answer.
Related Questions
Hisense washing machine not working
1 reply
No water in the drum after EF3 fault
4 replies
Hisense washing machine 001 code
6 replies
LG F1222TD PCB
5 replies
Bosch series 6 washer / drier stuck on 0.00 time and will not respond to any button
1 reply
Miele WEG365 WCS: drain fault and pump cavitation after transport - looking for W1/PowerWash expertise
2 replies
Water leaking from drain filter
1 reply
Water leaking from drawer of Meile washing machine
1 reply
Bosch washing machine only spins sometimes
2 replies
Hoover Wsahing Machine NOT filling with ENOUGH water
3 replies